Accessories/Universal
Universal Motorcycle Accessories
Here we have all of the universal parts you can use on your bike in the garage, at a track day. Just the kind of items that help you keep your bike tip top.
-
Details
JMP generator cover removal tool Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Streetfighter Monster Multistrada Hypermotard Hyperstrada Supersport Diavel
Price:£16.75Brand new top quality German Made JMP Tools generator cover removal tool.
Suitable for easy removal of the generator cover on your motorcycle.
They make the whole job a doddle by comparison to doing the job without. We use this same tool in our own workshop.
• Made from 6061 aluminium with steel screws
• Removes cover without damage
• Essential when removing the left side engine casing
• Manufactured by JMP Tools in Germany
• Time saver.
• Including M10 x 1,25 x 80 mm inner hex. screw and 2 x M6 x 1.0 x 30 mm hexagon head screws
• Essential tool.
This is a direct equivalent to the Ducati tool part no. 88713.0144
The tool allows the easy removal of the alternator / generator cover on all of the Ducati models as per the list below.
A very handy tool to have in your kit, helping you to maintain your machine correctly. Learn More -
Details
Bike It Emergency Cable Repair Kit
Price:£14.99Bike It Emergency Cable Repair Kit
• Emergency repair kit for temporary fixing of cables
• Includes 2 different coils of cable and selection of clamps
• Supplied in aluminium storage tin
Learn More -
Details
Bike it oval side stand pad
Price:£4.99Bike it oval stand pad - single
Bike Stand Pads. Saves your stand sinking in the mud, protects driveways and pavements.
• Bike Stand Pads • Saves your stand sinking in the mud • Protects driveways and pavements
Learn More -
Details
Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSWPL12
Price:£17.99Brand new manual twist safety lock wire tool.
Ideal for adding lockwire features to your bike for the race look. Also required for ACU racing regulations to lockwire certain components.
This comes complete with 30m of 0.8mm lock wire, so is a ready to go kit.
A must have for race or track day use. Learn More -
Details
Wurth high performance dry chain lube aerosol spray - 500ml UK Best Selling
Price:£10.00Wurth high performance dry chain lube.
Features:
• Transparent, high-pressure resistant, highly adhesive lubricant.
• Prevents running noise and wear.
• Forms a quick-drying, tough-elastic lubricating and protective film.
• Does not attack Perbunan O-rings.
• Resistant to water, steam, acids and bases.
• Protects against corrosion.
• Targeted dosing to inaccessible locations also possible.
• Can also be applied to running machinery, since the user's hands always remain outside the hazard zone.
Please Note: Shortly after being sprayed on, the product forms a highly effective, wax-based lubricating film, thereby ensuring optimum protection against lubrication.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid / oil items by Airmail. Learn More -
Details
JMP 1/2" drive T60 Torx bit socket swingarm eccentric rear hub pinch bolt Ducati Monster 1200 Supersport 939 Diavel 1260 XDiavel
Price:£8.48Brand new top quality chrome vanadium 1/2" drive T60 Torx bit socket, German Made JMP Tools.
This tool is the correct size for loosening and tightening the pinch bolt on the swing arm, to allow you to adjust the chain tension with the eccentric rear hub ; essential tool for the maintenance of your machine.
This is a substantial workshop quality tool with a total length of only 55mm, meaning it is easy to get the tool in and correctly torque up the pinch bolt once the chain is tensioned.
This is to fit and use with the following Ducati models listed below.
Handy tool for your own personal use for motorcycle maintenance or professional workshop use alike, we use the same tool in our own workshop. Learn More
Details
JMP steering head bearing removal tool 26mm - 35 mm headstock race remover 7223357
Price:
£36.05
Brand new top quality German Made JMP steering head bearing removal tool 26mm - 35 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 26mm - 35mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 26mm - 35mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More