More ...

This is brand new 42mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply

Important note: This is the pin kit only

If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.

This rear stand pin fits the Ducati models with single sided swing arm as the list below.


The Ducati 1098 had two different versions of rear spindle. This 42mm will fit Ducati 1098 made up till May 07. Later machine after May 07 use a 40mm pin, please look at our other items for this. If you are unsure, please measure the left hand side of the rear spindle to confirm prior to ordering.

We also have pins in different sizes to fit these stands should you require. Learn More

The BikeTek front head stand 24mm pin.

This is the pin only for use with the BikeTek Steering Head paddock stand that we also supply.

We also have other pins available separately in our shop should you also require them. These are in sizes 13mm, 15mm, 16.5mm, 17mm, 18mm, 19mm, 20mm, 21mm & 27mm.

Front paddock stands MUST always be used in conjunction with a rear paddock stand. Learn More

Brand new Billet alloy swing arm spool bobbins in anodized silver finish.

To fit motorcycles with M8 x 1.25mm swing arm threads.

● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand

Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.

Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.

Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.

We have a wide selection of colours and sizes available for these, please browse around shop. Learn More

The BikeTek front head stand 13mm pin.

This is the pin only for use with the BikeTek Steering Head paddock stand that we also supply.

We also have other pins available separately in our shop should you also require them. These are in sizes 15mm, 16.5mm, 17mm, 18mm, 19mm, 20mm, 21mm, 24mm & 27mm.

Front paddock stands MUST always be used in conjunction with a rear paddock stand. Learn More

This is brand new 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply

Important note: This is the pin kit only

If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.

This rear stand pin fits the Ducati models with single sided swing arm as the list below.


We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More

The BikeTek front head stand 20mm pin.

This is the pin only for use with the BikeTek Steering Head paddock stand that we also supply.

We also have other pins available separately in our shop should you also require them. These are in sizes 13mm, 15mm, 16.5mm, 17mm, 18mm, 19mm, 21mm, 24mm & 27mm.

Front paddock stands MUST always be used in conjunction with a rear paddock stand. Learn More

Brand new Billet alloy swing arm spool bobbins in anodized gold finish.

To fit motorcycles with M6 x 1.0mm swing arm threads.

● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand

Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.

Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.

Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.

We have a wide selection of colours and sizes available for these, please browse around shop. Learn More

Brand new Billet alloy swing arm spool bobbins in anodized gold finish.

To fit motorcycles with M10 x 1.5mm swing arm threads.

● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand

Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.

Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.

Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.

We have a wide selection of colours and sizes available for these, please browse around shop. Learn More

The BikeTek front head stand folds out to enable a motorcycle to be lifted by the front steering head tube.

This offers maximum access to the front end for all repair, cleaning and maintenance work.

Each stand is supplied with a kit of 5 of the most popular sized head lift pins covering 90% of motorcycles (including 13mm, 15mm, 16.5mm, 17mm and 18mm). Other larger size pins are available seperately.

Pins are easily and quickly changeable, making the stand extremely versatile accross a wide range of bikes.

We also have larger pins available separately in our shop should you also require them. These are in sizes 19mm, 20mm, 21mm, 24mm & 27mm.

Front paddock stands MUST always be used in conjunction with a rear paddock stand. Learn More