More ...
-
Details
JMP steering head bearing removal tool 26mm - 35 mm headstock race remover 7223357
Price:£36.05Brand new top quality German Made JMP steering head bearing removal tool 26mm - 35 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 26mm - 35mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
MotoGP Garage Mat Series 4 190 x 80 cm
Price:£59.99Garage mats can be used for decoration and display purposes in home garages. Mats also function as protective environmental work-mats both indoors and outdoors, preventing fuel and lubricant spills when carrying out maintenance and repairs.
Each mat is constructed with nylon-fibre top section which is oil and water resistant. The backing is non-slip and prevents lubricants seeping through. This mat fully complies with FIM regulations for environmental mats fluid absorption, suitable for use at tracks and circuits.
Mat is hand-washable.
Features:
• 190x80cm
• Series 4 garage mat
• Large size mat - 190x80cm
• Durable nylon fibre mat top
• Non-slip backing
• Oil and water resistant
Learn More -
Details
Safety Lock wire pliers tool Motorcycle Race 9" twist track day racing twister
Price:£24.99Brand new 9" safety lock wire pliers.
Ideal for adding lock wire features to your bike for the race look. Also required for ACU racing regulations to lock wire certain components.
Must have for race or track day use on your bikes. Learn More -
Details
Bike It Emergency Cable Repair Kit
Price:£14.99Bike It Emergency Cable Repair Kit
• Emergency repair kit for temporary fixing of cables
• Includes 2 different coils of cable and selection of clamps
• Supplied in aluminium storage tin
Learn More -
Details
Bike it oval side stand pad
Price:£4.99Bike it oval stand pad - single
Bike Stand Pads. Saves your stand sinking in the mud, protects driveways and pavements.
• Bike Stand Pads • Saves your stand sinking in the mud • Protects driveways and pavements
Learn More -
Details
Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSWPL12
Price:£17.99Brand new manual twist safety lock wire tool.
Ideal for adding lockwire features to your bike for the race look. Also required for ACU racing regulations to lockwire certain components.
This comes complete with 30m of 0.8mm lock wire, so is a ready to go kit.
A must have for race or track day use. Learn More -
Details
JMP generator cover removal tool Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Streetfighter Monster Multistrada Hypermotard Hyperstrada Supersport Diavel
Price:£16.75Brand new top quality German Made JMP Tools generator cover removal tool.
Suitable for easy removal of the generator cover on your motorcycle.
They make the whole job a doddle by comparison to doing the job without. We use this same tool in our own workshop.
• Made from 6061 aluminium with steel screws
• Removes cover without damage
• Essential when removing the left side engine casing
• Manufactured by JMP Tools in Germany
• Time saver.
• Including M10 x 1,25 x 80 mm inner hex. screw and 2 x M6 x 1.0 x 30 mm hexagon head screws
• Essential tool.
This is a direct equivalent to the Ducati tool part no. 88713.0144
The tool allows the easy removal of the alternator / generator cover on all of the Ducati models as per the list below.
A very handy tool to have in your kit, helping you to maintain your machine correctly. Learn More -
Details
BikeTek rear axle nut spanner tool for Ducati 749 999 899 959 Panigale Monster 821 Desmosedici D16RR models TLSAXD04
Price:£24.99Brand new top quality 36mm rear wheel nut spanner by BikeTek.
This tool will fit the rear wheel nut; essential tool for the maintenance of your machine.
This is a substantial tool.
This is to fit and use with the following Ducati models listed below.
• Suitable for Ducati rear wheel removal and fitting on the Ducati models specified above
• High quality tool
• For hand operation
• Soft grip coated handle
• Surface plated for long life
• 12 point spanner for use with 6 sided and 12 sided rear wheel spindle nuts
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components. Learn More
Details
JMP Tools eccentric steering head adjusting tool 748 749 916 996 998 999 887131037
Price:
£28.43
Brand new top quality German Made JMP Tools eccentric steering head adjusting tool.
This is used to adjust / rotate the eccentric steering head on the Ducati models as listed below:
This is used to adjust / rotate the eccentric steering head on the Ducati models as listed below:
• Strong tool, yet light enough to carry under your seat
• Manufactured by JMP in Germany
• Time saver
• Essential tool
• As per Ducati OEM tool part number 88713.1037
Handy factory equivalent tool to maintain and service your Ducati motorcycle. Learn More
Details
JMP eccentric rear hub chain adjusting tool Ducati 748 848 916 996 998 MH900e Streetfighter 848 1199 1299 Multistrada 1000 1100 1200 Hypermotard Monster S2R S4R S4Rs 1200 MV Agusta F3 F4 Brutale
Price:
£11.12
Brand new top quality German Made JMP Tools eccentric rear hub adjusting tool for single sided Ducati and MV Agusta models.
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK
This is a direct equivalent to the Ducati tool part no. 88713.1038
The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.
Learn More
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK
This is a direct equivalent to the Ducati tool part no. 88713.1038
The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.