More ...
-
Details
Brake Bleeding Assister Kit With 1 Way Non Return Bleeder Valve BRKKIT01
Price:£11.99Brake bleeding assistor kit utilises a compact unit with 1-way non return valve and connector hoses that simply attach onto the bleed nipple.
When the nipple is open and brakes bled, the unit prevents air and old fluid from being pulled back into the system, freeing the user from having to repeatedly open and close the bleed nipple.
A very handy tool for bleeding the brakes on your own.
Can be used for bleeding all hydraulic brake and clutch systems on your motorcycle to easily service and repair your motorcycle.
The item comes with complete instructions on using it for bleeding your brakes. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
JMP Motorcycle Brake Caliper Piston Detaching Pliers Tool ideal for garage or workshop use 7224975 TLSHOL49
Price:£24.29JMP Brake Caliper Piston Detaching Pliers Tool.
This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.
This tool has a 16.5mm to 40mm capacity.
We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.
These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.
Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.
EAN number: 4043981036961
Part number: 7224975 Learn More -
Details
BikeTek Universal Shock Wrench, Large 69-76mm & 89-96mm SHKWRE
Price:£19.99BikeTek Universal Shock Wrench - Large
● Universal shock wrench
● Small end is suitable for sizes: 69-76mm
● Large end is suitable for sizes: 89-96mm
This handy to have tool can be used for a variety of applications around the motorcycle, but is most commonly used for adjusting the rear shock preload adjustment.
Having the rear shock set up properly is essential for getting the best out of your machine, as when correctly set up it will improve the handling of your machine. With this tool, you can easily adjust your machine yourself at home.
We also have a smaller version of this tool available in our shop, should your shock absorber require a smaller size tool. Learn More -
Details
30m of 0.7mm Safety Lock Wire, ideal for ACU Racing or trackday requirements
Price:£9.9930m of 0.7mm Lock Wire.
Ideal for adding lockwire features to your bike for the race look.
It is required for ACU racing regulations to lockwire certain components.
We also have the lock wire tool and a 127m reel of 0.8mm lock wire and also lock wire tools available. Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item and is suitable for all motorcycles.
We also have Progrip grips, Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Renthal grip glue for handle bar grips G101
Price:£5.99Renthal highly developed grip glue, specially formulated to give a secure bond without damaging the grip.
This is a universal item and is suitable for all motorcycles.
We also have Progrip grips, Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
BikeTek Universal Shock Wrench, Small 38-45mm & 45-52mm SHKWRE01
Price:£14.99BikeTek Universal Shock Wrench - Small
● Universal shock wrench
● Small end is suitable for sizes: 38-45mm
● Large end is suitable for sizes: 45-52mm
This handy to have tool can be used for a variety of applications around the motorcycle, but is most commonly used for adjusting the rear shock preload adjustment.
Having the rear shock set up properly is essential for getting the best out of your machine, as when correctly set up it will improve the handling of your machine. With this tool, you can easily adjust your machine yourself at home.
We also have a larger version of this tool available in our shop, should your shock absorber require a larger sized tool. Learn More -
Details
JMP top yoke steering ring nut tool MV Agusta F3 F4 675 800 750, 1000, 1078, B3 B4 Brutale 750, 800, 910, 920, 989, 990, 1078, 1090 Rivale
Price:£22.69Brand new top quality German Made JMP Tools top yoke steering ring nut tool for MV Agusta models.Learn More
• This specially designed tool that is purposely made for loosening and correctly torquing the top yoke ring nut with a 1/2" socket wrench.
• Strong tool, yet light enough to carry under your seat
• Made from 6061 aluminium with steel pins, so is both light and strong
• Made in Germany
• 6 pins / studs
• PCD: 27 mm
• Pin-Ø: 4 mm
• Drive: 3/8 inch
• Pin spacing: 60°
The tool allows the adjustment, loosening and correct torquing up of the top yoke nut on all of the MV agusta models as per the list below.
Details
JMP cam timing wheel holding tool for Ducati 749 848 996R 998 999 1098 1198 Diavel Multistrada 1200 Hypermotard 821 Hyperstrada Monster S4R Testastretta
Price:
£13.90
Brand new JMP tool cam timing wheel holding tool, to fit Ducati Testastretta & Testastretta Evo engined models.
• This specially designed tool is purposely made for locking the camshaft wheels, so that the retaining nut can be loosened or tightened.
• Dimensions 160x14x80mm
• This single tool can be used on either set of cam wheels or you could order a pair and have one for each cylinder head
• Made in Germany
For use with the following Ducati models below:
Learn More
• This specially designed tool is purposely made for locking the camshaft wheels, so that the retaining nut can be loosened or tightened.
• Dimensions 160x14x80mm
• This single tool can be used on either set of cam wheels or you could order a pair and have one for each cylinder head
• Made in Germany
For use with the following Ducati models below:
Learn More