New 41 tooth 525 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 41 tooth 525 pitch alloy rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

30m of 0.7mm Lock Wire.

Ideal for adding lockwire features to your bike for the race look.

It is required for ACU racing regulations to lockwire certain components.

We also have the lock wire tool and a 127m reel of 0.8mm lock wire and also lock wire tools available. Learn More

Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.

Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.

ProClean demonstration video



Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.

Available as a 70ml aerosol spray.

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More

New to the FILTREX range comes a performance replacement air filter product guaranteed to increase horsepower and acceleration.


Professionally engineered with a premium filtration material set within a high specification chassis, Filtrex will deliver increased performance and longevity over OEM and other aftermarket filters.
This simply replaces the OEM air filter part number 42610251A or 42610191A
A very good life time warranty upgrade and an instant performance upgrade.
To fit the Ducati models as the list below


High performance upgrade replacement spare service part for your 2v engine Ducati motorcycle Learn More

New 39 tooth 525 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 39 tooth 525 pitch alloy rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

NTN Brand new top quality pair of front wheel bearings for Ducati machines.

NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

Equivalent Ducati part no 702.5.045.1A and 75162.2566

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

This is one caliper set of Street Excel Ceramic (HF) compound rear brake pads to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Part number: 730HF
Ean Number: 5703858106522


SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

5ml tube of 'Thumbs Up' grip glue.

● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste

This is a universal item but we know that they are also suitable for the following Ducati's


We also have Renthal grips and clean grips in our Shop, please take a look. Learn More

Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm

This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.

To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.

• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.

A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More