Ducati SportTouring
Ducati SportTouring Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
Grey front brake lever for Ducati - Early 12mm pivot axial version 748 851 888 916 Monster SS ST2 ST4
Price:£17.34This is brand new front brake lever in satin grey finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are very close in colour to the original, but no longer available grey'ish bronze levers. These come with a chrome silver adjuster, but they are compatible with the original adjuster and you could easily move your original to this lever to give a more original look.
These are suitable for Ducati as per the list below
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost.
Handy low cost replacement spare part for your Ducati motorcycle. Learn More -
Details
Genuine Ducati OEM steering stem headstock bearing seal for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s 93010041B
Price:£5.94Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.
These are supplied singularly and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 3 & 4 500ml 102718
Price:£7.81MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More -
Details
Number plate light for Ducati 748 916 996 998 Monster 600 620 695 750 800 900 1000 S2R S4 S4R ST2 ST3 ST4 Supersport
Price:£12.76This is a non OEM direct replacement numberplate light to fit the Ducati models in the list below
This is a direct replacement for Ducati OEM part number 525.1.004.3A or 52510042A or Aprilia part number AP8212702 and is virtually identical to the original part.
It has a cable length of approx 23cm and comes complete with fixing nuts and bulb.
A handy low cost replacement spare part for your pride and joy. Learn More -
Details
JMP 1/2" female to 3/4" male socket adapter chrome vanadium
Price:£10.20Brand new top quality German made JMP Tools chrome vanadium socket adapter, 1/2" female to 3/4" male.
Ideal for use with the wheel nut sockets that we also have available
Essential tool for the maintenance of your machine.
The photos in the gallery are of the actual item offered for sale, please study them all carefully prior to ordering.
We have other tools for your Ducati in our shop, please take a look. Learn More -
Details
MOTUL Motocool Expert coolant 1 litre ready to use 105914
Price:£9.60Motul radiator fluid Motocool Expert 1 litre
Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.
Nitrite free / Amine free / Phosphate free
Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used
Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142
Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
New throttle control & grips Ducati 748 916 996 998 ST2 ST3 ST4 SS ie Monster S2R S4 S4RS 620 750 900 1000 SS MH900e gas gaszug accelerator
Price:£60.98Brand new throttle control twist grip and left grip set made by Domino in Italy.
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati. The throttle control is fitted with the OEM grip and comes with left grip as well, as shown.
This is virtually identical in fitment to the OEM Ducati part number 400520388 or 65420021A for Ducati 748, 916 & 996 models, except this has no fast idle button and also has Domino on the top of the throttle cable cover, as shown.
This is the same as the Ducati 998, ST, SS and Monster part number 65420031A, as those Ducati models had no fast idle button.
Handy Italian made spare part for your Ducati. Learn More -
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:£26.84Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More -
Details
SBS Carbon Tech Rear brake pads for Ducati 749 848 899 999 1098 1198 1199 Panigale Streetfighter Hypermotard 730RQ
Price:£24.24Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
SBS RQ rear brake pads are designed for riders using the rear brake to help steer into turns and handle the bike out of turns.
This is one caliper set of Carbon Tech (RQ) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
JMP crankshaft turning tool & degree wheel Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Monster Multistrada Hypermotard Supersport Streetfighter Diavel
Price:£68.14Brand new top quality German Made JMP crank shaft turning & setting tool with degree wheel for Ducati models.
• Suitable for virtually all Ducati engines built from 1990 to present, excluding Panigale.
• Invaluable for turning the engine while setting the rocker arm shims.
• Time Saver.
• This specially designed tool allows you to rotate the engine to allow correct tensioning of the cam belts after replacement.
• This comes with the Degree wheel, allowing you to see the correct position of the engine.
• Strong tool, ideal for both home or professional workshop use.
• Made in Sheffield, UK
This is a direct equivalent to the Ducati tool part no. 88765.1523 or also 88713.0123 and 98112.0002
The tool allows the rotating of the engine via the crank end on the Ducati models as per the list below.
Learn More