Rear Sprockets

Brand new light weight billet alloy sprocket carrier. Makes changing rear sprockets quick and easy.

This gives a performance advantage as it will reduce un-sprung mass at the rear hub. This helps to improve both acceleration and turn in due the lower inertia generated at the rear hub.

The pattern is correct to accept sprockets from the big name manufacturers including Renthal & JT, so there are plenty of options for sprocket choice.

A very high spec piece of kit that also implements a cush drive saver. The extra pieces of alloy around the rear of each cush drive as shown, stops fatigued cush drive bobbins from separating and causing damage to the eccentric rear hub. This is a known weak point on rear cush drives and eliminated by this sprocket adapter.

This will fit the following models.


Fitting a quick release sprocket adapter means no more reaching for a huge socket to remove the sprocket carrier when changing the rear sprocket.

Changing a rear sprocket with one of these fitted is done with minimal tools in a matter of minutes. Learn More

New 38 tooth 525 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 38 tooth 525 pitch alloy rear JT sprocket

* Note * This is part of a 525 conversion on the Multistrada 1200, as they are 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

New 38 tooth 520 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch, rather than the OEM 525 pitch.

Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 38 tooth 520 pitch alloy rear JT sprocket

* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM, depending upon model. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

New 40 tooth 520 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch, rather than the OEM 525 pitch.

Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 40 tooth 520 pitch alloy rear JT sprocket

* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM, depending upon model. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

New 39 tooth 520 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch, rather than the OEM 525 pitch.

Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 38 tooth 520 pitch alloy rear JT sprocket

* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM, depending upon model. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

Brand new 42 tooth 530 pitch rear sprocket by Esjot Sprockets.
This will fit the following Ducati models.

Please select Ducati Multistrada 1200 10-11 Ducati Multistrada 1200 ABS 10-17 Ducati Multistrada 1200 S D-AIR ABS 16-17 Ducati Multistrada 1200 S GT Granturismo ABS 13-14 Ducati Multistrada 1200 S Pikes Peak ABS 12-17 Ducati Multistrada 1200 S Sport ABS 10-17 Ducati Multistrada 1200 S Sport Touring ABS 10-14 Ducati Multistrada 1260 ABS 18-19 Ducati Multistrada 1260 S ABS 18-19 Ducati Multistrada 1260 S D/Air ABS 18-19 Ducati Multistrada 1260 Pikes Peak ABS 18-19

This is a one piece steel sprocket. If you at all unsure, then please send us a message and we will help with fitment information.

We have other sprocket tooth variations for these machines in the shop, please take a look.

German manufactured Esjot Sprockets are amongst the highest quality available. Learn More

• Add to Wishlist
• | Add to Compare

Details

JT Sprockets 39 tooth steel rear sprocket for Ducati, 525 pitch 1098 1198 1199 1299 Panigale Monster 1200 Streetfighter Diavel JTR761.39

Add to Cart

Price:

£26.68

New 39 tooth 525 pitch steel rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:

Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.

Please select Ducati 1098 07-08 Ducati 1098 R 08-09 Ducati 1098 S 07-08 Ducati Steetfighter 1098 09-11 Ducati Steetfighter 1098S 09-13 Ducati 1198 09-11 Ducati 1198 R Corse SE 09-10 Ducati 1198 S 09-11 Ducati 1198 S Corse SE 10 Ducati 1199 Panigale 12-15 Ducati 1199 Panigale S 12-15 Ducati 1199 Panigale S Tricolore 12-13 Ducati 1199 Panigale Superleggera 15 Ducati 1299 Panigale 15-17 Ducati 1299 Panigale S 15-17 Ducati 1299 Panigale Superleggera 17 Ducati Monster 1200 14-16 Ducati Monster 1200 S 14-16 Ducati Monster 1200 R 16 Ducati Diavel 1198 all models 11-16