New 38 tooth 520 pitch steel rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:


* 38 tooth 520 pitch steel rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed.
Handy replacement spare service part for your Ducati motorcycle

EAN number: 824225313321
Part number: JTR751.38 Learn More

Motul radiator fluid Motocool Expert 1 litre

Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.

Nitrite free / Amine free / Phosphate free

Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used

Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142

Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

EBC Double HH Sintered front Pads - FA322/4HH

Made in EBC Brakes manufacturing facility, Cleveland, USA, state of the art manufacturing facility, the “Double-H” sintered pads have set the levels by which all other pads are now judged in the European market. Boasting the highest “HH” friction rating and a lifetime which is the envy of our competition, the “Double-H” pads are extended in their application range for this year and are available in a new quieter running, faster bedding formulation, further raising the attractive commercial features of this already top selling product line.

• Highest friction HH rated for MAXIMUM stopping power.
• Made from Sintered copper alloy like Original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold.
• Where required unique STAINLESS STEEL radiator plates fitted to reduce heat transfer into bikes hydraulics.
• EBC unique design keeps pads cooler and prevents pad drag and overheat or fade.

This is one caliper set of EBC FA322/4HH Sintered (HH) compound front brake pads to fit all of the machines in the pull down list below.


The exact format of the pads are as shown in the image Learn More

New 39 tooth 525 pitch steel rear sprocket by JT Sprockets

This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is the actual sprocket offered, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 39 tooth 525 pitch steel rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml

Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.

Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.

Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.

Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)

Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650237312
Part number: 102718 Learn More

Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.

These are supplied singularly and are to fit the Ducati models listed in the pull down box below.



Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More

Brand new Athena complete engine oil seal kit. Made by Athena in Italy.
This is to fit the Cagiva models as below

Please select Cagiva Mito Sports 125 89-92 Cagiva Mito Mk1 125 92-93 Cagiva Mito Mk2 125 93-94 Cagiva Mito Evolution 1 125 94-99 Cagiva Mito Evolution 2 125 00-08 Cagiva Mito 125 Euro 2 04-08 Cagiva Mito 125 SP525 08-14 Cagiva Planet 125 98-03 Cagiva Raptor 125 03-11 Cagiva Super City 125 91-99 Cagiva 125 W8 92-99 Cagiva 125 W8 Trail 92-99

Included in the kit are:
● 2 x Crank seals
● Clutch arm seal
● Gear selector shaft seal
● Power valve seal
● Sprocket shaft seal
● Thermostat housing seal
● Water pump seal

The gaskets are manufactured to European quality standard ISO 9000 and are under constant quality control. High quality materials and the use of Reinz and Elring sealing paper speak for itself.
Handy low cost spare parts to help keep your machine running tip top. Learn More

Brand new Athena full engine gasket kit. Made by Athena in Italy.
This is to fit the Cagiva models as below

Please select Cagiva Mito Sports 125 89-92 Cagiva Mito Mk1 125 92-93 Cagiva Mito Mk2 125 93-94 Cagiva Mito Evolution 1 125 94-99 Cagiva Mito Evolution 2 125 00-08 Cagiva Mito 125 Euro 2 04-08 Cagiva Mito 125 SP525 08-14 Cagiva Planet 125 98-03 Cagiva Raptor 125 03-11 Cagiva Super City 125 91-99 Cagiva 125 W8 92-99 Cagiva 125 W8 Trail 92-99

Included in the kit are:
● Crank case gasket
● Clutch cover gasket
● Exhaust gaskets
● Reed valve gasket
● Cylinder head o-rings
● 0.3, 0.5 and 0.8mm cylinder base gaskets
● Generator cover gasket
● A variety of other O rings and seals as pictured

The gaskets are manufactured to European quality standard ISO 9000 and are under constant quality control. High quality materials and the use of Reinz and Elring sealing paper speak for itself.
Handy low cost spare parts to help keep your machine running tip top. Learn More

Brand new top end gasket kit.

As per Cagiva OEM part number 8000-38203 and 8000-47707

This is to fit the models as below


Included in the kit are:
● Cylinder head O rings
● 3x base gaskets in differing thicknesses
● Reed block gasket
● Exhaust Gasket
● Numerous O rings

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
Handy low cost spare parts to help keep your machine running tip top. Learn More