Monster S4RS
Here we have listed available replacement parts for your Ducati Monster S4R.
-
Details
Ducati rear paddock stand PIN - 21.5mm - 748 848 916 996 998 Hypermotard 796 821 939 1100 Monster 796 S2R S4R S4Rs Multistrada 1000 1100
Price:£44.99This is brand new 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More -
Details
JT Sprockets 40 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.40
Price:£29.21New 40 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 40 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Fork Oil Motul Expert Semi synthetic Medium 10W - 1 Litre 105930
Price:£16.24The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.
This is 1 litre of Motul Expert fork oil 10W medium weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008424
Part number: 105930 Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Ariete forks seals for Ducati and Aprilia Ohlins models RSV1000 RSV4 748R 749R 996R 998R 999R 1098 1198 Desmosedici D16RR MTS1100 Monster 1100S S4Rs 43mm ARI123
Price:£21.83This is a pair of Ariete forks seals to fit the Aprilia & Ducati Ohlins fork models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 43 x 55 x 11mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513536373
Part number: ARI123 Learn More -
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
NTN steering stem headstock bearings - pair for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s
Price:£48.88NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.
NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More -
Details
Motul 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Price:£10.31Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.
Standards: API SJ / SH / SG - JASO MA
• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters
This is 1 litre of Motul 5000 4T Semi-synthetic Engine Oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
JMP Piston Ring Installer Remover Tool, for rings 1.2-6.3mm (3/64"-1/4") in thickness
Price:£11.74Brand new top quality German Made JMP Piston Ring Installer Remover.
Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.
• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More