Bearings & Seals

This is an NTN needle roller bearing to fit inside the eccentric rear hub.

This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A

To fit the Ducati models listed in the pull down box below.

Learn More

NTN Brand new top quality pair of front wheel bearings for Ducati machines.

NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

Equivalent Ducati part no 702.5.045.1A and 75162.2566

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

This is a pair of seals to fit either side of the needle roller bearing in the eccentric rear hub on the models listed below.

This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.

NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.



Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More

Brand new top quality pair of NTN roller bearings to fit the eccentric rear hub on the models listed above.
These 2 bearings replace the double roller bearing. The 2 single roller bearings offer an engineering equivalent solution.

This item is offered at a huge saving over the OEM bearing cost of around £90.

NTN Brand new top quality pair of front wheel bearings for Ducati machines.

NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

This are to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

Brand new exhaust gasket.

As per Ducati OEM part number 790.1.004.1A

This is to fit the models as below



Gasket size 56 x 70 x 1MM

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost spare parts to help keep your machine running tip top. Learn More

Brand new exhaust gasket.

This is to fit the models as below



Gasket size: 56 x 81 x 1MM

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
Handy low cost spare parts to help keep your machine running tip top. Learn More

Brand new cylinder head O ring gaskets - pair.

As per Cagiva OEM part number 8000.38203 and 8000.47707

This is to fit the models as below

Please select Cagiva Mito Sports 125 89-92 Cagiva Mito Mk1 125 92-93 Cagiva Mito Mk2 125 93-94 Cagiva Mito Evolution 1 125 94-99 Cagiva Mito Evolution 2 125 00-08 Cagiva Mito 125 Euro 2 04-08 Cagiva Mito 125 SP525 08-14 Cagiva Planet 125 98-03 Cagiva Raptor 125 03-11 Cagiva Super City 125 91-99 Cagiva 125 W8 92-99 Cagiva 125 W8 Trail 92-99

Gasket size:
Inner gasket size 69 x 1.78mm
Outer gasket size 99.5 x 1.7mm

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
Handy low cost spare parts to help keep your machine running tip top.

EAN number: P45MATT700001
Part number: 7340094 Learn More

Brand new exhaust gasket.

As per Ducati OEM part number 79010012A and 79010011A

This is to fit the models as below

Please select Ducati 748 95-99 Ducati 748 00-03 Ducati 748 S 99-02 Ducati 748 SP 95-97 Ducati 748 SPS 98-99 Ducati 748 R 99-02 Ducati 851 Strada 91-92 Ducati 888 SP5 93-94 Ducati 888 Strada 93-96 Ducati Monster S4 916cc 01-03 Ducati 916 Senna 95-98 Ducati 916 SP 94-96 Ducati 916 Strada 93-94 Ducati 916 SPS 996cc 97-98 Ducati 996 99-02 Ducati 996 S 01-02 Ducati 996 SPS 98-00 Ducati 996 R 01-02 Ducati Monster 996 S4R 04-06 Ducati ST4 916 Sport Touring 99-03 Ducati ST4S 996 Sport Touring 01-05 Ducati ST4S 996 Sport Touring ABS 03-05

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost spare parts to help keep your machine running tip top.

EAN number: S410110012003
Part number: 7344203 Learn More