Monster S4R
Here we have listed available replacement parts for your Ducati Monster S4R.
-
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
NTN steering stem headstock bearings - pair for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s
Price:£48.88NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.
NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More -
Details
Motul 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Price:£10.31Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.
Standards: API SJ / SH / SG - JASO MA
• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters
This is 1 litre of Motul 5000 4T Semi-synthetic Engine Oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
JMP Piston Ring Installer Remover Tool, for rings 1.2-6.3mm (3/64"-1/4") in thickness
Price:£11.74Brand new top quality German Made JMP Piston Ring Installer Remover.
Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.
• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More -
Details
NTN Eccentric rear hub Roller bearings for Ducati - PAIR
Price:£19.48Brand new top quality pair of NTN roller bearings to fit the eccentric rear hub on the models listed above.
These 2 bearings replace the double roller bearing. The 2 single roller bearings offer an engineering equivalent solution.
This item is offered at a huge saving over the OEM bearing cost of around £90.
NTN Brand new top quality pair of front wheel bearings for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
This are to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
Motul 5000 4T Semi-synthetic Engine Oil 10W-40 - 4 Litre
Price:£35.22Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 4 Litre
Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.
Standards: API SJ / SH / SG - JASO MA
• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters
This is 4 litres of Motul 5000 4T Semi-synthetic Engine Oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Motul 5100 4T 10w40 4 Litre Techno synthetic ester technology motorcycle engine oil
Price:£49.90Motul - 5100 4T Techno-synthetic ester technology engine oil 10W40 4T 4 litres
High film strength and easier and faster gear changing. Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.
Standards: API SL / SJ / SH / SG - JASO MA
• Techno-synthetic ester technology
• High film strength
• Ideal for oil immersed clutches
• Compatible with catalytic converters
This is 4 litres of Motul 5100 4T Techno-synthetic ester technology engine oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
BikeTek Tools Spring Hook Puller Tool side stand, exhaust, brake return spring, ideal OEM, Termignoni, Akrapovic, Arrow, Micron, Remus - HOOKSPR
Price:£9.23Brand new top quality spring puller tool from the BikeTek range of tool products.
Suitable for easy removal and installation of a variety of springs all over your motorcycle.
• Universal tool for both spring removal and refitting
• Applications include: exhaust springs, brake springs, side stand springs, centre stand springs, general return spring fitting tool
• Length 155mm, black powder coated finish
• Manufactured by BikeTek.
• Time saver.
• Essential tool. Learn More -
Details
Ducati rear paddock stand PIN - 21.5mm - 748 848 916 996 998 Hypermotard 796 1100 Monster 796 S2R S4R S4Rs Multistrada 1000 1100 PMD-01
Price:£20.96This is brand new Bike-Lift aluminium 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
This is a pin kit from the Italian manufacturer Bike-Lift. These are dimensionally correct to use with both the BikeTek rear paddock stand and also the Bike-Lift stand too.
These are an ideal alternate to the steel pin that we also sell. As these are aluminium, there will never be a problem with the pin rusting onto the inside of the rear spindle.
These are also handy as they are so light by comparison to the steel pin we also have available, coming in at only 265g.
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More