Monster S4 916
Here we have listed available replacement parts for your Ducati Monster S4 916.
-
Details
Silkolene Super 4 Semi Synthetic 1L 10w40 motorcycle engine oil S600986087
Price:£11.28The Silkolene Super 4 10W-40 1 Litre is a semi-synthetic 4-stroke engine oil, with MC-Syn Technology, for all modern motorcycles.
This incorporates detergents, dispersants and load carrying agents to give excellent engine cleanliness and minimum wear of moving parts and contains a balanced blend of inhibitors and anti-wear agents to ensure correct operation of oil immersed clutches and other drive line components.
The advanced additive chemistry protects the engine and transmission from start-up to full power.
Specifications: API 4-Cycle Performance, Spec. SF and SG and JASO MA and MA2.
• Incorporates detergents, dispersants and load carrying agents
• Minimum wear of moving parts
• Contains a balanced blend of inhibitors
• Advanced additive chemistry
• Protects the engine
This is 1 litre of Silkolene Super 4 Semi Synthetic motorcycle engine oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Swing arm pivot needle bearing kit for Ducati 851 888 Monster ST 2 3 4 Supersport Sport Classic MH900e
Price:£32.82NTN Brand new top quality set of 4 swing arm pivot needle bearings and seals for Ducati machines.
The seals in the kit are upgraded double lipped R23 gator sprung seals, in order to help prevent water ingress into the bearings and shaft and provide a longer lasting replacement.
Equivalent Ducati part no bearings 400520202 or earlier part number 76400.0004, seals 93041271A or earlier part numbers 937832026 & 075549265 & 400520117
These are supplied as a set of 4 and are to fit the the crankcase for the swing arm on Ducati models listed in the pull down box below.
Handy replacement spare service parts for your Ducati motorcycle. Learn More -
Details
Genuine Ducati front sprocket retaining plate for Ducati 748 851 888 916 996 Monster Supersport Scrambler ST2 ST4 Multistrada 620 SL MH900e
Price:£5.87Brand new Genuine Ducati front sprocket retaining washer plate
This will fit the following Ducati models.
OEM part number 826.1.011.1A or alternate number 067016105
A handy low cost spare part for your pride and joy. Learn More -
Details
Clutch cover gasket genuine Ducati OEM 748 916 996 998 999 1098 1198 ST2 ST3 ST4 SS Monster Hypermotard 78810522A
Price:£7.10New OEM Ducati clutch cover gasket.
Ducati OEM part number 78810522A
This is one clutch pressure plate bearing to fit all dry clutch Ducati models as listed below
Handy genuine Ducati OEM replacement service spare part for your Ducati motorcycle. Learn More -
Details
Bike it oval side stand pad
Price:£4.99Bike it oval stand pad - single
Bike Stand Pads. Saves your stand sinking in the mud, protects driveways and pavements.
• Bike Stand Pads • Saves your stand sinking in the mud • Protects driveways and pavements
Learn More -
Details
Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSWPL12
Price:£17.99Brand new manual twist safety lock wire tool.
Ideal for adding lockwire features to your bike for the race look. Also required for ACU racing regulations to lockwire certain components.
This comes complete with 30m of 0.8mm lock wire, so is a ready to go kit.
A must have for race or track day use. Learn More -
Details
Bike It Brake fluid Reservoir Protector Shroud Red Ducati
Price:£7.49Bike It Brake fluid Reservoir Protector Shroud Red Ducati
Protective shroud. Covers front brake master cylinder reservoir for protection against debris and absorbs discharged brake fluid.
• Protective shroud
• Covers front brake master cylinder reservoir
• Protects against debris
• Absorbs discharged brake fluid
Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 5.1 500ml 100950
Price:£10.50MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 13593 Learn More -
Details
Single banjo brake light switch pressure M10 x 1.00mm Ducati Aprilia Cagiva fine pitch OPS015
Price:£19.99Brand new BikeTek banjo fitting brake light switch in size M10 x 1.00mm.
This is a single length banjo switch, so it is suitable for use on rear brake systems or also front brake systems that have only one banjo line at the master cylinder. It could also be used for some hydraulic clutch applications too.
Ideal for Italian machines such as Ducati, Aprilia and Cagiva that use Brembo parts as these are generally this size on their banjo's.
If you at all unsure, then please send us a message and we will help with fitment information.
Handy replacement spare electrical service part for your Ducati, Aprilia or Cagiva motorcycle.
EAN number: 5034862352996
Part number: OPS015 Learn More -
Details
Wurth high performance dry chain lube aerosol spray - 500ml UK Best Selling
Price:£10.00Wurth high performance dry chain lube.
Features:
• Transparent, high-pressure resistant, highly adhesive lubricant.
• Prevents running noise and wear.
• Forms a quick-drying, tough-elastic lubricating and protective film.
• Does not attack Perbunan O-rings.
• Resistant to water, steam, acids and bases.
• Protects against corrosion.
• Targeted dosing to inaccessible locations also possible.
• Can also be applied to running machinery, since the user's hands always remain outside the hazard zone.
Please Note: Shortly after being sprayed on, the product forms a highly effective, wax-based lubricating film, thereby ensuring optimum protection against lubrication.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid / oil items by Airmail. Learn More