Monster S2R 1000
Here we have listed available replacement parts for your Ducati Monster S2R 1000
-
Details
New throttle control & grips Ducati 748 916 996 998 ST2 ST3 ST4 SS ie Monster S2R S4 S4RS 620 750 900 1000 SS MH900e gas gaszug accelerator
Price:£60.98Brand new throttle control twist grip and left grip set made by Domino in Italy.
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati. The throttle control is fitted with the OEM grip and comes with left grip as well, as shown.
This is virtually identical in fitment to the OEM Ducati part number 400520388 or 65420021A for Ducati 748, 916 & 996 models, except this has no fast idle button and also has Domino on the top of the throttle cable cover, as shown.
This is the same as the Ducati 998, ST, SS and Monster part number 65420031A, as those Ducati models had no fast idle button.
Handy Italian made spare part for your Ducati. Learn More -
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:£26.84Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More -
Details
JMP eccentric rear hub chain adjusting tool Ducati 748 848 916 996 998 MH900e Streetfighter 848 1199 1299 Multistrada 1000 1100 1200 Hypermotard Monster S2R S4R S4Rs 1200 MV Agusta F3 F4 Brutale
Price:£11.12Brand new top quality German Made JMP Tools eccentric rear hub adjusting tool for single sided Ducati and MV Agusta models.
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK
This is a direct equivalent to the Ducati tool part no. 88713.1038
The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.
Learn More -
Details
JMP crankshaft turning tool & degree wheel Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Monster Multistrada Hypermotard Supersport Streetfighter Diavel
Price:£68.14Brand new top quality German Made JMP crank shaft turning & setting tool with degree wheel for Ducati models.
• Suitable for virtually all Ducati engines built from 1990 to present, excluding Panigale.
• Invaluable for turning the engine while setting the rocker arm shims.
• Time Saver.
• This specially designed tool allows you to rotate the engine to allow correct tensioning of the cam belts after replacement.
• This comes with the Degree wheel, allowing you to see the correct position of the engine.
• Strong tool, ideal for both home or professional workshop use.
• Made in Sheffield, UK
This is a direct equivalent to the Ducati tool part no. 88765.1523 or also 88713.0123 and 98112.0002
The tool allows the rotating of the engine via the crank end on the Ducati models as per the list below.
Learn More -
Details
JMP Rear Wheel Nut Socket Tool Ducati 748, 848, 916, 996, 998, Streetfighter 848, Monster 796, S2R, S4R, 1100, Hypermotard, 821, MTS 1000 & 1100 MH900e
Price:£25.97Brand new top quality chrome vanadium 12 tooth 3/4" drive rear wheel nut socket, German Made JMP Tools.Learn More
Essential tool for the maintenance of your machine.
This is a substantial tool, weighing in at 560g.
This will fit the rear wheel nut of the following Ducati models.
This is to fit and use with the following Ducati models listed below.
Details
JMP valve shim measuring tool for Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Streetfighter Diavel XDiavel Multistrada 1200 Scrambler
Price:
£11.86
Brand new top quality German Made JMP Tools valve shim measuring tool for Ducati Testastretta, Desmoquattro & 1000ds engined models with 7mm valves.
• This specially designed tool is purposely made for measuring the valve shims to accurately do your clearances
• For engines with 7mm valves
• One each for measuring the opening and closing shims
• Made in Germany
For use with the following Ducati models below:
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
• This specially designed tool is purposely made for measuring the valve shims to accurately do your clearances
• For engines with 7mm valves
• One each for measuring the opening and closing shims
• Made in Germany
For use with the following Ducati models below:
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
Details
JT Sprockets 45 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.45
Price:
£28.74
New 45 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 45 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 45 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
Details
JMP front sprocket retaining plate for Ducati 749 848 996R 998 999 1098 1198 Multistrada 1000 1100 1200 1260 Hypermotard 821 939 1100 Diavel
Price:
£4.46
Brand new front sprocket washer made by JMP in Germany.
This will fit the following Ducati models.
Equivalent to OEM part number 85110041A
If you at all unsure, then please send us a message and we will help with fitment information.
A handy low cost spare part for your pride and joy. Learn More
This will fit the following Ducati models.
Equivalent to OEM part number 85110041A
If you at all unsure, then please send us a message and we will help with fitment information.
A handy low cost spare part for your pride and joy. Learn More
Details
Athena exhaust gasket for Ducati Paso 906 907 SL 900 ST2 Sport Classic Hypermotard 796 1100 Monster 600 620 695 696 750 795 800 900 1000 Multistrada Supersport
Price:
£3.26
Brand new exhaust gasket.
As per Ducati OEM part numbers 0370.84.005 & 067084025 & 075584030
This is to fit the models as below
Gasket size 38 x 47.5 x 2.5mm
The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost replacement spare service parts to help keep your machine running tip top.
EAN number: S410190012011
Part number: 7341761 Learn More
As per Ducati OEM part numbers 0370.84.005 & 067084025 & 075584030
This is to fit the models as below
Gasket size 38 x 47.5 x 2.5mm
The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost replacement spare service parts to help keep your machine running tip top.
EAN number: S410190012011
Part number: 7341761 Learn More
Details
All Balls Racing fork dust seals 43mm Showa for Ducati 748 749 916 996 998 999 Monster 600 750 900 S2R S4R 1000 Multistrada ST3 ST4 Supersport
Price:
£15.19
This is a pair of All Balls Racing fork dust seals to fit Showa 43mm forks.
These are suitable for the Ducati models in the pull down list below
Please note: These are to fit the models listed above with 43mm Showa forks only and these do not fit Ohlins fork models. Learn More
These are suitable for the Ducati models in the pull down list below
Please note: These are to fit the models listed above with 43mm Showa forks only and these do not fit Ohlins fork models. Learn More