Service Parts

Ducati Monster 900 Service Parts
We have an extensive range of service parts to keep your Ducati Monster 900 running tip top. Please browse the categories below for each product to fit your machine.-
Details
Genuine Ducati OEM steering stem headstock bearing seal for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s 93010041B
Price:£5.94Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.
These are supplied singularly and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 3 & 4 500ml 102718
Price:£7.81MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More -
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:£26.84Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More -
Details
JT Sprockets 16 tooth front sprocket for Ducati 748 851 888 906 Monster 400 600 620 695 696 750 797 800 900 SS SL 520 pitch 736.16
Price:£15.02New 16 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 16 tooth 520 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
JMP front sprocket retaining plate for Ducati 748 851 888 916 996 Monster Supersport Scrambler ST2 ST4 Multistrada 620 SL MH900e
Price:£7.26Brand new front sprocket retaining washer plate made by JMP in Germany.
This will fit the following Ducati models.
Equivalent to OEM part number 826.1.011.1A or alternate number 067016105
A handy low cost spare part for your pride and joy. Learn More -
Details
HiFlo Filtro Air filter for Ducati ST2 ST3 ST4 ST4s SS 851 888 Monster 400 600 750 900 Paso HFA6002
Price:£11.15Brand new HiFlo Filtro air filter.
This is a direct replacement air filter and simply replaces the OEM air filter part number 42610091A or earlier part number 3709.8610
This air filter fits the Ducati models listed below
Made by HiFlo Filtro, this is exactly identical specification to the OEM air filter.
A handy low cost spare part to help you service your Ducati and keep it running tip top. Learn More -
Details
Mahle fuel filter for Ducati Monster 900 Supersport 350 400 600 750 900 Paso 750 Sport 750 KL63
Price:£5.87Brand new Mahle fuel filter.
As per Ducati OEM part number 42510012A
This is to fit the models as below
Mahle fuel filters are made in Germany.
A handy low cost replacement service spare part to help keep your machine running tip top. Learn More -
Details
Athena exhaust gasket for Ducati Paso 906 907 SL 900 ST2 Sport Classic Hypermotard 796 1100 Monster 600 620 695 696 750 795 800 900 1000 Multistrada Supersport
Price:£3.26Brand new exhaust gasket.
As per Ducati OEM part numbers 0370.84.005 & 067084025 & 075584030
This is to fit the models as below
Gasket size 38 x 47.5 x 2.5mm
The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost replacement spare service parts to help keep your machine running tip top.
EAN number: S410190012011
Part number: 7341761 Learn More -
Details
All Balls Racing fork dust seals 43mm Showa for Ducati 748 749 916 996 998 999 Monster 600 750 900 S2R S4R 1000 Multistrada ST3 ST4 Supersport
Price:£15.19This is a pair of All Balls Racing fork dust seals to fit Showa 43mm forks.
These are suitable for the Ducati models in the pull down list below
Please note: These are to fit the models listed above with 43mm Showa forks only and these do not fit Ohlins fork models. Learn More -
Details
Nikone forks seals for Ducati Supersport 600 750, Monster 600 750 900, Indiana 650 750, Laguna Seca, Montjuich, Santa Monica
Price:£10.00Nikone are Japanese industry standard Original Equipment fork oil seals.
This is a pair of Nikone forks seals to fit the Ducati models in the pull down list below
Please Note: This is to fit the above models that have 40mm forks fitted, please check your forks prior to ordering to ensure the correct spare parts are ordered. Learn More

