Tools
Here we have a selection of tools that will be handy when working on your motorcycle.
-
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
-
Details
Laser Tools cam shaft timing belt pulley wheel ring nut tool 5341 Ducati 748 851 888 916 996 Hypermotard Monster Multistrada ST Supersport MH900e
Price:£40.97Brand new top quality UK Made cam shaft timing belt pulley wheel ring nut tool is part of the motorcycle range of Ducati specific tools from Laser Tools. This tool provides one holding tool which stops the camshaft pulley rotating and the socket tool to loosen and tighten the cam pulley retaining ring nut.
• Application fits Ducati Pantah and other 2 valve belt drives and 4 valve belt drives.
• Includes a special 1/2" drive socket and pulley holding tool.
• Can be used with Laser Part No 5181 - Crankshaft Turner that we also have available.
• Selected steel in black finish.
• Manufactured by Laser Tools in Sheffield, UK.
• Time saver.
• Essential tool.
This is equivalent to the Ducati factory tool with part number 88700.5644
This is to fit and use with the following Ducati models listed below.
EAN number: 5018341053413
Part number: 5341 Learn More -
Details
Laser Tools engine compression tester tool 0-300 psi 2516 testing 2 stroke or 4 with 10mm, 12mm, 14mm & 18mm adapters
Price:£38.86Brand new top quality UK Made Laser Tools compression tester tool.
Suitable for most petrol engines including motorcycles. Complete with 10mm | 12mm | 14mm | 18mm thread adaptors. Side valve allows quick re-test. Easy to read dial, scale 0-300psi/0-21bar and 300mm flexi hose.
• Suits most petrol engines.
• Complete with 10 | 12 | 14 | 18mm thread adaptors.
• Side valve allows quick re-test.
• 300mm flexi-hose.
• Easy to read dial - 0-300psi (0-21bar).
• Manufactured by Laser Tools in Sheffield, UK.
• Time saver.
• Essential tool.
This is an ideal tool for checking how healthy your petrol motorcycle engine is. A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
JMP Piston Ring Installer Remover Tool, for rings 1.2-6.3mm (3/64"-1/4") in thickness
Price:£11.74Brand new top quality German Made JMP Piston Ring Installer Remover.
Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.
• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More -
Details
Laser Tools Spring Hook Puller Tool side stand, exhaust, brake return spring, ideal OEM, Termignoni, Akrapovic, Arrow, Micron, Remus - 5511
Price:£5.86Brand new top quality UK Made Laser Tools spring puller tool.
Suitable for easy removal and installation of a variety of springs all over your motorcycle.
• Universal tool for both spring removal and refitting
• Applications include: exhaust springs, brake springs, side stand springs, centre stand springs, general return spring fitting tool
• Length 170mm, plated finish
• Manufactured by Laser Tools in Sheffield, UK.
• Time saver.
• Essential tool. Learn More -
Details
Laser Tools Piston Ring Installer Remover Tool, for rings 1.2-6.3mm (3/64"-1/4") in thickness - 5250
Price:£7.15Brand new top quality UK Made Laser Tools Piston Ring Installer Remover.
Suitable for easy removal and installation of piston rings your motorcycle.
• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by Laser Tools in Sheffield, UK.
• Time saver.
• Essential tool. Learn More -
Details
BikeTek Tools Spring Hook Puller Tool side stand, exhaust, brake return spring, ideal OEM, Termignoni, Akrapovic, Arrow, Micron, Remus - HOOKSPR
Price:£9.23Brand new top quality spring puller tool from the BikeTek range of tool products.
Suitable for easy removal and installation of a variety of springs all over your motorcycle.
• Universal tool for both spring removal and refitting
• Applications include: exhaust springs, brake springs, side stand springs, centre stand springs, general return spring fitting tool
• Length 155mm, black powder coated finish
• Manufactured by BikeTek.
• Time saver.
• Essential tool. Learn More -
Details
JMP Rear Wheel Nut Socket Tool Ducati 748, 848, 916, 996, 998, Streetfighter 848, Monster 796, S2R, S4R, 1100, Hypermotard, 821, MTS 1000 & 1100 MH900e
Price:£25.97Brand new top quality chrome vanadium 12 tooth 3/4" drive rear wheel nut socket, German Made JMP Tools.Learn More
Essential tool for the maintenance of your machine.
This is a substantial tool, weighing in at 560g.
This will fit the rear wheel nut of the following Ducati models.
This is to fit and use with the following Ducati models listed below.
JMP steering head bearing removal tool 26mm - 35 mm headstock race remover 7223357
Price:
£36.05
Brand new top quality German Made JMP steering head bearing removal tool 26mm - 35 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 26mm - 35mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 26mm - 35mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More