MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml

Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.

Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.

Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.

Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)

Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650237312
Part number: 102718 Learn More

Brand new Mahle fuel filter.

As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A

This is to fit the models as below



Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More

New 16 tooth 520 pitch front sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 16 tooth 520 pitch steel front JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

Brand new front sprocket retaining washer plate made by JMP in Germany.
This will fit the following Ducati models.


Equivalent to OEM part number 826.1.011.1A or alternate number 067016105

A handy low cost spare part for your pride and joy. Learn More

Brand new exhaust gasket.

As per Ducati OEM part numbers 0370.84.005 & 067084025 & 075584030

This is to fit the models as below

Please select Ducati Paso 906 89-93 Ducati 907 900 ie 90-93 Ducati ST2 944 Sport Touring 97-03 Ducati Hypermotard 796 10-13 Ducati Hypermotard 1100 07-09 Ducati Hypermotard 1100 S 08-09 Ducati Hypermotard 1100 Evo 10-13 Ducati Hypermotard 1100 SP Evo 10-13 Ducati Hypermotard 1100 SP Evo Corse 12-13 Ducati MH 900 E 01-02 Ducati Monster 600 94-01 Ducati Monster 600 City 99-00 Ducati Monster 600 City Dark 99-00 Ducati Monster 600 Dark 98-01 Ducati Monster 600 Metallic 00-01 Ducati Monster 620 ie DD 02-06 Ducati Monster 620 S ie 02-03 Ducati Monster 620 ie MD Dark 03-06 Ducati Monster 620 ie DD Dark 04-05 Ducati Monster 695 07-08 Ducati Monster 696 08-11 Ducati Monster 696 ABS 10-14 Ducati Monster 696 Anniversary ABS 13 Ducati Monster 750 96-01 Ducati Monster 750 ie 02 Ducati Monster 750 City 99-00 Ducati Monster 750 City Dark 99 Ducati Monster 750 Dark 99-01 Ducati Monster 750 ie Dark 02 Ducati Monster 750 Metallic 00-01 Ducati Monster 795 11-14 Ducati Monster 796 10-12 Ducati Monster 796 ABS 11-14 Ducati Monster 796 Anniversary ABS 13 Ducati Monster 800 ie 03-04 Ducati Monster 800 ie S 03-04 Ducati Monster 800 ie Dark 03 Ducati Monster 800 S2R 05-07 Ducati Monster 800 S2R Dark 05-06 Ducati Monster 900 93-99 Ducati Monster 900 S 98-99 Ducati Monster 900 ie 00-02 Ducati Monster 900 City 99 Ducati Monster 900 ie City 00 Ducati Monster 900 City Dark 99 Ducati Monster 900 ie City Dark 00 Ducati Monster 900 Cromo 98-99 Ducati Monster 900 ie Cromo 01 Ducati Monster 900 ie Dark 00-02 Ducati Monster 900 ie Metallic 00-01 Ducati Monster 900 S ie Special 00-01 Ducati Monster 1000 ie 03-05 Ducati Monster 1000 S ie 03-05 Ducati Monster 1000 S2R 06-08 Ducati Monster 1100 09-11 Ducati Monster 1100 S 09-11 Ducati Monster 1100 ABS 10-11 Ducati Monster 1100 S ABS 10-11 Ducati Monster 1100 Diesel ABS 13 Ducati Monster 1100 Evo ABS 12-13 Ducati Monster 1100 Evo Anniversary ABS 13 Ducati Multistrada 620 ie DD 05-06 Ducati Multistrada 620 ie MD Dark 05-06 Ducati Multistrada DS 1000 03-06 Ducati Multistrada DS 1000 S 05-06 Ducati Multistrada 1100 07-09 Ducati Multistrada 1100 S 07-09 Ducati S 620 ie Sport Carenata 03-04 Ducati S 620 ie Sport Nuda 03-04 Ducati S 750 ie Sport Carenata 01-02 Ducati S 750 ie Sport Nuda 01-02 Ducati S 800 ie Sport Carenata 03-04 Ducati S 800 ie Sport Nuda 03-04 Ducati Supersport 400 SS 93-95 Ducati Supersport 600 SS Carenata 94-98 Ducati Supersport 600 SS Nuda 94-98 Ducati Supersport 750 SS Carenata 94-98 Ducati Supersport 750 SS ie Carenata 99-02 Ducati Supersport 750 SS Nuda 91-98 Ducati Supersport 750 SS ie Nuda 99-02 Ducati Supersport 800 SS ie Carenata 03-05 Ducati Supersport 800 SS ie Nuda 03-04 Ducati Supersport 900 SS 90 Ducati Supersport 900 SS Carenata 91-98 Ducati Supersport 900 SS ie Carenata 99-02 Ducati Supersport 900 SS FE Final Edition 98 Ducati Supersport 900 SS Nuda 91-98 Ducati Supersport 900 SL Super Light 92-97 Ducati Supersport 900 SS ie Nuda 99-02 Ducati Supersport 1000 SS Carenata 03-04 Ducati Supersport 1000 SS Nuda 03 Ducati Supersport DS 1000 SS Carenata 03-08 Ducati Sportclassic 1000 Biposto 07-09 Ducati Sportclassic 1000 S 07-10 Ducati Sportclassic 1000 Monoposto 06-07 Ducati Sportclassic 1000 Paul Smart 06 Ducati Sportclassic GT 1000 07-10 Ducati Sportclassic GT 1000 Touring 09-10 Ducati Scrambler 800 Classic ABS 15-18 Ducati Scrambler 800 Full Throttle ABS 15-18 Ducati Scrambler 800 Icon ABS 15-18 Ducati Scrambler 800 Urban Enduro ABS 15-18 Ducati Portedefolio 1100 S 07-08

Gasket size 38 x 47.5 x 2.5mm

The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost replacement spare service parts to help keep your machine running tip top.

EAN number: S410190012011
Part number: 7341761 Learn More

Motul - 5100 4T Techno-synthetic ester technology engine oil 10W40 4T 4 litres

High film strength and easier and faster gear changing. Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.

Standards: API SL / SJ / SH / SG - JASO MA

• Techno-synthetic ester technology
• High film strength
• Ideal for oil immersed clutches
• Compatible with catalytic converters

This is 4 litres of Motul 5100 4T Techno-synthetic ester technology engine oil 10W-40

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 4 Litre

Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.

Standards: API SJ / SH / SG - JASO MA

• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters

This is 4 litres of Motul 5000 4T Semi-synthetic Engine Oil 10W-40

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

EBC Double H Sintered Streetbike Rear Pads - FA47HH

Made in EBC Brakes manufacturing facility, Cleveland, USA, state of the art manufacturing facility, the “Double-H” sintered pads have set the levels by which all other pads are now judged in the European market. Boasting the highest “HH” friction rating and a lifetime which is the envy of our competition, the “Double-H” pads are extended in their application range for this year and are available in a new quieter running, faster bedding formulation, further raising the attractive commercial features of this already top selling product line.

• Highest friction HH rated for MAXIMUM stopping power.
• Made from Sintered copper alloy like Original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold.
• Where required unique STAINLESS STEEL radiator plates fitted to reduce heat transfer into bikes hydraulics.
• EBC unique “Double Segment” VENTED design keeps pads cooler and prevents pad drag and overheat or fade.

This is one caliper set of Sintered (HH) compound rear brake pads to fit all of the machines in the pull down list below.


The exact dimensions and format of the pads are as shown in the image Learn More

EBC Organic (Kevlar) GG Streetbike Pads, rear caliper fitment - FA47

Made in EBC's own factory in Bristol, England, the EBC Kevlar series has now been renamed NAO series or Non Asbestos Organic, although we still use the famous Dupont Kevlar® fibre in conjunction with other high tech fibres that have come on the market. The NAO series are a superb all round value for money replacement for all levels of motorcycle and are still extremely popular with many riders who prefer the “feel” of organic pads. NAO series are fully TUV tested and KBA certified and conform to the new ECE R90 brake regulations, which are about to storm the European market. EBC is at the forefront of this technology and will be the first on the market to offer Reg. 90 approved pads and packaging.

• Still number 1 selling EBC formulation
• German Motorrad magazine tests rated these above most organics
• KBA Approved and will comply with Reg90
• Typical organic “feel” which many riders prefer

This is one caliper set of Organic (GG) compound rear brake pads to fit all of the machines in the pull down list below.


The exact dimensions and format of the pads are as shown in the image Learn More