Monster 1100
Here we have listed available replacement parts for your Ducati Monster 1100.
-
Details
JT Sprockets 44 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.44
Price:£26.48New 44 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 44 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Front brake & clutch lever pair set for Ducati 749 848 999 1098 1198 Panigale Streetfighter Monster S4RS 1100 Diavel Radial version in silver chrome finish
Price:£49.99This is a brand new pair of control levers in silver chrome finish.
Genuine levers are incredibly expensive. We have a pair of top quality replica levers here at a fraction of the cost.
These are the radial type to fit the models listed in the pull down box below.
We also have levers in our shop to suit earlier model Ducati's. Learn More -
Details
SBS Low Sinter Rear brake pads for Ducati 749 848 899 999 1098 1198 1199 Panigale Streetfighter Hypermotard 730LS
Price:£23.21Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Low Sinter (LS) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
Ducati Billet Clutch Slave Cylinder Oberon Performance CLU-0116 (Special Order Part)
Price:£112.50This replacement Ducati clutch slave cylinder has been designed to improve the performance and the looks of the original Ducati cylinder.
This is a very well engineered and detailed product.
Substantially reducing the heaviness of the original clutch action, aching arms and clunky gear changes are a thing of the past. The internal piston design, seals and breather hole have been drastically enhanced to stop leaks and leave a smoother clutch action. CNC machined from billet for lightness, strength and precision looks.
Everything you need is included in the kit, plus a conversion shaft 'extension piece' for earlier bikes that use the shorter clutch push rod.
Direct fit for ALL external slave cylinder models as per the models listed below.
The clutch slave cylinder also includes mounting screws and banjo washers. So it's a ready to fit kit.
Available in a choice of six colours, in order that you may compliment your machine whilst upgrading. Learn More
Details
Fork Oil Motul Expert Semi synthetic Medium Heavy 15W - 1 Litre 105931
Price:
£16.24
The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.
This is 1 litre of Motul Expert fork oil 15W medium-heavy weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008417
Part number: 105931 Learn More
This is 1 litre of Motul Expert fork oil 15W medium-heavy weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008417
Part number: 105931 Learn More
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:
£3.99
5ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More
Details
Ariete forks seals for Ducati and Aprilia Ohlins models RSV1000 RSV4 748R 749R 996R 998R 999R 1098 1198 Desmosedici D16RR MTS1100 Monster 1100S S4Rs 43mm ARI123
Price:
£21.83
This is a pair of Ariete forks seals to fit the Aprilia & Ducati Ohlins fork models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 43 x 55 x 11mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513536373
Part number: ARI123 Learn More
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 43 x 55 x 11mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513536373
Part number: ARI123 Learn More
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:
£103.49
This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:
£37.37
Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More
Details
NTN steering stem headstock bearings - pair for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s
Price:
£48.88
NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.
NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More
NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More