Ducati Monster
Ducati Monster Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
SBS 762DC Dual Carbon Front brake pads for 4 pad calipers
Price:£43.79The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.
Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!
This is one caliper set of Dual Carbon (DC) compound front brake pads.
These are to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Part number: 762DC
EAN number: 5703858197599
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team
BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.
When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.
When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More -
Details
JT rear Sprocket 520 45 tooth Ducati 851 888 Monster 400 600 620 695 696 750 800 900 907 Paso JTR735.45
Price:£19.60New 45 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following machines.
* 45 tooth 520 pitch steel rear JT sprocket.
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225311372
Part number: JTR735.45 Learn More -
Details
Front brake & clutch lever pair set for Ducati 749 848 999 1098 1198 Panigale Streetfighter Monster S4RS 1100 Diavel Radial version in silver chrome finish
Price:£49.99This is a brand new pair of control levers in silver chrome finish.
Genuine levers are incredibly expensive. We have a pair of top quality replica levers here at a fraction of the cost.
These are the radial type to fit the models listed in the pull down box below.
We also have levers in our shop to suit earlier model Ducati's. Learn More -
Details
Ducati front and rear paddock stand set 748 848 916 996 998 Hypermotard 796 821 939 1100 Monster S2R S4R S4RS Multistrada 1000 1100
Price:£145.42This is brand new Front & Rear Paddock Stand set for single sided swing arm models
This is a set of paddock stands, one front and one rear.
Paddock stands are suitable for general maintenance and repair work. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.
We also have these listed in our shop as a rear stand on it's own, should that be required instead.
This rear stand fits the Ducati models with single sided swing arm as the list below.
Front stand is universal so could easily be used on a variety of other bikes.
Front stand has spring loaded quick release under fork adaptors.
Heavy duty nylon wheels.
These stands are NOT intended for storage use.
Tough powder coated red finish. Learn More -
Details
JT Sprockets 42 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.42
Price:£30.90New 42 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 42 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
JT 38 tooth alloy rear sprocket for Ducati, 525 pitch 1098 1198 1199 1299 Panigale Monster 1200 Streetfighter Diavel JTA761.38
Price:£25.34New 38 tooth 525 pitch alloy rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.
This will fit the following models.
* 38 tooth 525 pitch alloy rear JT sprocket
* Note * This is part of a 525 conversion on the Multistrada 1200, as they are 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
JT Sprockets 14 tooth front sprocket for Ducati 916 996 ST2 ST4 Monster 795 796 S4 S4R Hypermotard 796 MTS 950 525 pitch 740.14
Price:£16.38New 14 tooth 525 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 14 tooth 525 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
JT rear Sprocket 520 36 tooth Ducati 851 888 Monster 400 600 620 695 696 750 800 900 907 Paso JTR735.36
Price:£15.80New 36 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following machines.
* 36 tooth 520 pitch steel rear JT sprocket.
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225306156
Part number: JTR735.36 Learn More -
Details
JMP Motorcycle Brake Caliper Piston Detaching Pliers Tool ideal for garage or workshop use 7224975 TLSHOL49
Price:£24.29JMP Brake Caliper Piston Detaching Pliers Tool.
This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.
This tool has a 16.5mm to 40mm capacity.
We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.
These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.
Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.
EAN number: 4043981036961
Part number: 7224975 Learn More -
Details
Nikone forks seals for Ducati Supersport 350 400 750 900, 851, 888, Monster 750 900, SL 900
Price:£9.99Nikone are Japanese industry standard Original Equipment fork oil seals.
This is a pair of Nikone forks seals to fit the Ducati models in the pull down list below
Please Note: This is to fit the above models that have 41mm forks fitted, please check your forks prior to ordering to ensure the correct spare parts are ordered. Learn More