Brake bleeding assistor kit utilises a compact unit with 1-way non return valve and connector hoses that simply attach onto the bleed nipple.

When the nipple is open and brakes bled, the unit prevents air and old fluid from being pulled back into the system, freeing the user from having to repeatedly open and close the bleed nipple.

A very handy tool for bleeding the brakes on your own.
Can be used for bleeding all hydraulic brake and clutch systems on your motorcycle to easily service and repair your motorcycle.
The item comes with complete instructions on using it for bleeding your brakes. Learn More

New 44 tooth 520 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:


* 44 tooth 520 pitch alloy rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

This is brand new 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply

Important note: This is the pin kit only

If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.

This rear stand pin fits the Ducati models with single sided swing arm as the list below.


We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More

New 42 tooth 525 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 42 tooth 525 pitch alloy rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Par number: 706DC
EAN number: 5703858179779

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

Filtrex Heavy Duty Hi Flow filters are supplied to Major original equipment manufacturers worldwide; with further compliance to Japanese Industry standards.

Choose an Original Equipment product at a fraction of the price.

To fit all years and models of the machines listed below

Learn More

Dual headed chain brush for easy agitation of dirt when cleaning your motorcycle final drive chain

Chain maintenance is key to getting the most out of your motorcycle and also extending the life of your chain.

Suitable for use with most chain cleaning products.

The shape of the brush head allows you to clean 3 sides of the chain simultaneously, which will speed up the job at hand.

The long bristles at the other end allow the user to clean hard reach areas.

We also have replacement brush heads available for this item:

Click here for replacement brush heads

EAN number: 5034862213600
Part number: CHBBSH02 Learn More

New 42 tooth 520 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:


* 42 tooth 520 pitch alloy rear JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.

Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.

We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More

JMP Brake Caliper Piston Detaching Pliers Tool.

This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.

This tool has a 16.5mm to 40mm capacity.

We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.

These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.

Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.

EAN number: 4043981036961
Part number: 7224975 Learn More