JMP Brake Caliper Piston Detaching Pliers Tool.

This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.

This tool has a 16.5mm to 40mm capacity.

We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.

These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.

Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.

EAN number: 4043981036961
Part number: 7224975 Learn More

Renthal clean grips supplied as a pair. Ideal workshop or garage accessory.

Features:
● Keeps your grips clean while your bike is being worked on.
● Velcro fastened.
● Power-Wash proof permanent graphics.
● As used by top factory teams.
● Ideal garage, race or track day accessory.

These are a universal item but we know that they are also suitable for the following Ducati's


We also have a wide selection of Progrip grips and Renthal grips in our Shop, please take a look. Learn More

NTN Brand new top quality pair of swing arm pivot needle roller for Ducati machines.

NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

Equivalent Ducati part no 76400.0001 or part code 701.4.017.1A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.

This is 1 litre of Motul Expert fork oil 10W medium weight.

• Hydraulic fork fluid for racing applications.

• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating

• Increased resistance to high temperatures eliminates lubricant oxidation

Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks

• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul

• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade

• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency

• Anti-wear and extreme pressure resistant properties

• Anti-corrosion additive protects seals and valves

• Motul Fork Oil Factory Line can be mixed to obtain the required absorption

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650008424
Part number: 105930 Learn More

Brand new Billet alloy swing arm spool bobbins in anodized gold finish.

To fit motorcycles with M8 x 1.25mm swing arm threads.

● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand

Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.

Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.

Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.

We have a wide selection of colours and sizes available for these, please browse around shop. Learn More

New 15 tooth 525 pitch front sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:



This will fit the following models.


* 15 tooth 525 pitch steel front JT sprocket

We have other sprocket tooth variations for these machines in the shop, please take a look.
Great quality replacement spare service part for your Ducati motorcycle. Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Part number: 762DC
EAN number: 5703858197599


SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

5ml tube of 'Thumbs Up' grip glue.

● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste

This is a universal item but we know that they are also suitable for the following Ducati's


We also have Renthal grips and clean grips in our Shop, please take a look. Learn More

This is a pair of Ariete forks seals to fit the Aprilia & Ducati Ohlins fork models in the pull down list below

Please select Aprilia RSV 1000 Tuono Fighter 00-07 Aprilia RSV 1000 Tuono R 00-09 Aprilia RSV 1000 Tuono Racing 00-07 Aprilia RSV 1000 R Factory 00-07 Aprilia RSV 1000 R 00-07 Aprilia RSV4 1000 R 09-13 Aprilia RSV4 1000 R Factory 09-12 Ducati 748R 01-02 Ducati 749R 04-06 Ducati 996SPS 99-00 Ducati 996R 01-02 Ducati 998R 01-02 Ducati 999S 03-06 Ducati 999R 03-06 Ducati 1098 S 07-09 Ducati 1098 R 08-09 Ducati 1198 S 09-11 Ducati 1198 SP 09-11 Ducati 1198 R 09-11 Ducati D16RR Desmosedici 07-09 Ducati Streetfighter S 1098 10-13 Ducati Monster S4Rs 06-08 Ducati Monster 1100 S 09-13 Ducati Multistrada 1100 S 07-09

Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.

Fork seal size: 43 x 55 x 11mm

Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.

Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.

EAN number: 8051513536373
Part number: ARI123 Learn More