Ducati 998
Ducati 998 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
NTN Eccentric rear hub needle roller bearing for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£29.99This is an NTN needle roller bearing to fit inside the eccentric rear hub.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A
To fit the Ducati models listed in the pull down box below.
Learn More -
Details
Ducati single sided rear paddock stand for 748 848 916 996 998 Hypermotard 796 821 939 1100 Monster S2R S4R S4RS Multistrada 1000 1100
Price:£119.98This is brand new Rear Paddock Stand for single sided swing arm models
Side paddock stands are suitable for general maintenance and repair work. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.
This rear stand fits the Ducati models with single sided swing arm as the list below.
Heavy duty nylon wheels.
These stands are NOT intended for storage use.
Tough powder coated red finish. Learn More -
Details
JT Sprockets 40 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.40
Price:£29.21New 40 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 40 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Fork Oil Motul Expert Semi synthetic Medium 10W - 1 Litre 105930
Price:£16.24The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.
This is 1 litre of Motul Expert fork oil 10W medium weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008424
Part number: 105930 Learn More -
Details
Renthal medium compound handle bar grips G148
Price:£10.79Renthal highly developed, Medium compound race grips with full diamond pattern.
Renthal's grip technology ensures that the grip exactly matches your style.
Renthal grips give you a very comfortable ride and great feel.
These are the 125mm long version, ideal for your Ducati. Open ended so that you can retain the use of your bar ends. This is for a Pair of grips.
These are a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grip glue and Renthal clean grips in our Shop, please take a look. Learn More -
Details
SBS Sintered Front brake pads for Ducati 4 pad calipers - 762HS
Price:£31.93Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Ariete forks seals for Ducati and Aprilia Ohlins models RSV1000 RSV4 748R 749R 996R 998R 999R 1098 1198 Desmosedici D16RR MTS1100 Monster 1100S S4Rs 43mm ARI123
Price:£21.83This is a pair of Ariete forks seals to fit the Aprilia & Ducati Ohlins fork models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 43 x 55 x 11mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513536373
Part number: ARI123 Learn More -
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More