Ducati 916
Ducati 916 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
JT Sprockets 14 tooth front sprocket for Ducati 748 851 888 906 Monster 400 600 620 695 696 750 797 800 900 SS SL 520 pitch 736.14
Price:£15.02New 14 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 14 tooth 520 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
SBS Sintered Front brake pads for Ducati Twin pin caliper 706HS
Price:£21.18Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
SBS Race Sinter Front brake pads Ducati Twin pin caliper 706RS
Price:£25.15Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
NTN Eccentric rear hub needle roller bearing for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£29.99This is an NTN needle roller bearing to fit inside the eccentric rear hub.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A
To fit the Ducati models listed in the pull down box below.
Learn More -
Details
Swing Arm Pivot Seal Rings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:£7.27NTN Brand new top quality pair of swing arm pivot seals for Ducati machines.
These fit on the swing arm each side of the needle roller bearings.
Equivalent Ducati part no 0412.02.295 or also 930.5.012.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
Filtrex Performance Motorcycle Air Filter Care Cleaner and Service Cleaning Kit AIRKIT01
Price:£40.00Filtrex Performance Air Filter Care and Service Cleaning Kit.
This service kit contains a pump spray filter cleaner and an aerosol of service oil for use with Filtrex Performance air filters.
Filters should be serviced every 2000 miles to maintain optimum performance.
Note: Due to the nature of this kit, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
Quick Release Billet rear sprocket carrier for Ducati 748, 848, 916, 996, 998, Hypermotard Hyperstrada 821 939, Monster 796, S2R, S4R, 1100 / Evo, Multistrada 1000, 1100
Price:£74.99Brand new light weight billet alloy sprocket carrier. Makes changing rear sprockets quick and easy.
This gives a performance advantage as it will reduce un-sprung mass at the rear hub. This helps to improve both acceleration and turn in due the lower inertia generated at the rear hub.
The pattern is correct to accept sprockets from the big name manufacturers including Renthal & JT, so there are plenty of options for sprocket choice.
A very high spec piece of kit that also implements a cush drive saver. The extra pieces of alloy around the rear of each cush drive as shown, stops fatigued cush drive bobbins from separating and causing damage to the eccentric rear hub. This is a known weak point on rear cush drives and eliminated by this sprocket adapter.
This will fit the following models.
Fitting a quick release sprocket adapter means no more reaching for a 41mm socket to remove the sprocket carrier when changing the rear sprocket.
Changing a rear sprocket with one of these fitted is done with minimal tools in a matter of minutes. Learn More -
Details
Pipercross performance trumpet sock air filter Ducati MPX014
Price:£64.48A Pipercross performance trumpet sock air filter.
This replace OEM air filters as it fits over the intake trumpets inside the airbox. This is ideal if you have fitted 1 piece Carbon Fibre airtubes for example.
A very good life time warranty upgrade that also adds power, for minimal cost.
To fit the Ducati 748, 916 and 996. This will only fit machines that have the normal injection fitted. This will not fit the homologation models that are fitted with shower injection. This will also not fit any model of Ducati 998.
Learn More -
Details
Fuchs Renolit red rubber grease G51 - 500g - brake caliper seals
Price:£13.20Fuchs Renolit red rubber grease G51 - 500g for brake caliper seals
A special rubber compatible grease or use on hydraulic brake and clutch components where hardening or swelling of rubber must be avoided.
It is designed to assist in the assembly of rubber components for brake, clutch and suspension units and is suitable for natural and synthetic rubbers.
This product is highly resistant to petrol and other chemical attack, mechanical and thermally stable.
This product is ideal for use with the following:
• Hydraulic components
• Rubber components
• Rubber seals
• Motorcycle brake caliper assemblies
• Petrol resistant applications
• For lubricating and servicing oil resistant seals
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
NTN Swing Arm Pivot Needle Roller bearings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:£15.28NTN Brand new top quality pair of swing arm pivot needle roller for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 76400.0001 or part code 701.4.017.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More