Ducati 916
Ducati 916 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
Silver front brake lever for Ducati 748 851 888 916 996 Monster ST2 Supersport - Early 12mm pivot axial version
Price:£29.99This is brand new front brake lever in silver chrome finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are suitable for Ducati as per the list below
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost. Learn More -
Details
JT Sprockets 38 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.38
Price:£28.24New 38 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 38 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
NTN Eccentric rear hub needle roller bearing for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£29.99This is an NTN needle roller bearing to fit inside the eccentric rear hub.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A
To fit the Ducati models listed in the pull down box below.
Learn More -
Details
NTN Front wheel bearings for Ducati - PAIR
Price:£14.68NTN Brand new top quality pair of front wheel bearings for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 702.5.045.1A and 75162.2566
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
Ducati rear paddock stand PIN - 21.5mm - 748 848 916 996 998 Hypermotard 796 821 939 1100 Monster 796 S2R S4R S4Rs Multistrada 1000 1100
Price:£44.99This is brand new 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More -
Details
Renthal Soft compound handle bar grips G147
Price:£10.79Renthal highly developed, Soft compound race grips with full diamond pattern.
Renthal's grip technology ensures that the grip exactly matches your style.
Renthal grips give you a very comfortable ride and great feel.
These are the 125mm long version, ideal for your Ducati. Open ended so that you can retain the use of your bar ends. This is for a Pair of grips.
These are a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grip glue and Renthal clean grips in our Shop, please take a look. Learn More -
Details
JT Sprockets 44 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.44
Price:£26.48New 44 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 44 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Fuchs Renolit red rubber grease G51 - 500g - brake caliper seals
Price:£13.20Fuchs Renolit red rubber grease G51 - 500g for brake caliper seals
A special rubber compatible grease or use on hydraulic brake and clutch components where hardening or swelling of rubber must be avoided.
It is designed to assist in the assembly of rubber components for brake, clutch and suspension units and is suitable for natural and synthetic rubbers.
This product is highly resistant to petrol and other chemical attack, mechanical and thermally stable.
This product is ideal for use with the following:
• Hydraulic components
• Rubber components
• Rubber seals
• Motorcycle brake caliper assemblies
• Petrol resistant applications
• For lubricating and servicing oil resistant seals
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Renthal grip glue for handle bar grips G101
Price:£5.99Renthal highly developed grip glue, specially formulated to give a secure bond without damaging the grip.
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More