Ducati 916
Ducati 916 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
NTN Swing Arm Pivot Roller bearings for Ducati - PAIR
Price:£14.68NTN Brand new top quality pair of swing arm pivot roller bearings for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 702.5.045.1A and 75162.2566
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
JT Sprockets 36 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.36
Price:£18.48New 36 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 36 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
NTN Eccentric rear hub needle roller bearing for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£29.99This is an NTN needle roller bearing to fit inside the eccentric rear hub.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A
To fit the Ducati models listed in the pull down box below.
Learn More -
Details
Silver front brake & clutch lever pair set for Ducati 748 851 888 916 996 Monster ST2 Supersport - Early 12mm pivot axial version
Price:£49.99This is brand new pair of control levers in silver chrome finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are suitable for Ducati as per the list below.
Genuine levers are incredibly expensive. We have a pair of top quality replica levers here at a fraction of the cost. Learn More -
Details
Silver clutch lever for Ducati 748 851 888 916 996 Monster ST2 Supersport - Early 12mm pivot axial version
Price:£29.99This is brand new clutch lever in silver chrome finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are suitable for Ducati as per the list below
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost. Learn More -
Details
JT Sprockets 39 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.39
Price:£28.24New 39 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 39 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More