Ducati 848
Ducati 848 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
Clutch lever for Ducati 749 848 999 1098 1198 Panigale Streetfighter Monster S4RS 1100 Diavel Radial version in silver chrome finish
Price:£29.99This is a brand new clutch lever in silver chrome finish.
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost.
This is the radial type to fit the models listed in the pull down box below.
We also have levers in our shop to suit earlier model Ducati's. Learn More -
Details
JT Sprockets 14 tooth front sprocket for Ducati 520 pitch conversion 749 848 998 999 1098 1198 JTF742.14
Price:£14.28New 14 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch rather than the OEM 525 pitch.
This will fit the following models.
* 14 tooth 520 pitch steel front JT sprocket
* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
Fork Oil Motul Expert Semi synthetic Heavy 20W - 1 Litre 105928
Price:£16.24The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.
This is 1 litre of Motul Expert fork oil 20W heavy weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008417
Part number: 105931 Learn More -
Details
Renthal clean grips / handle bar covers G190
Price:£5.66Renthal clean grips supplied as a pair. Ideal workshop or garage accessory.
Features:
● Keeps your grips clean while your bike is being worked on.
● Velcro fastened.
● Power-Wash proof permanent graphics.
● As used by top factory teams.
● Ideal garage, race or track day accessory.
These are a universal item but we know that they are also suitable for the following Ducati's
We also have a wide selection of Progrip grips and Renthal grips in our Shop, please take a look. Learn More -
Details
NTN Swing Arm Pivot Needle Roller bearings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:£15.28NTN Brand new top quality pair of swing arm pivot needle roller for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 76400.0001 or part code 701.4.017.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
JT Sprockets 42 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.42
Price:£23.04New 42 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 42 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Quick Release Billet rear sprocket carrier for Ducati 748, 848, 916, 996, 998, Hypermotard Hyperstrada 821 939, Monster 796, S2R, S4R, 1100 / Evo, Multistrada 1000, 1100
Price:£74.99Brand new light weight billet alloy sprocket carrier. Makes changing rear sprockets quick and easy.
This gives a performance advantage as it will reduce un-sprung mass at the rear hub. This helps to improve both acceleration and turn in due the lower inertia generated at the rear hub.
The pattern is correct to accept sprockets from the big name manufacturers including Renthal & JT, so there are plenty of options for sprocket choice.
A very high spec piece of kit that also implements a cush drive saver. The extra pieces of alloy around the rear of each cush drive as shown, stops fatigued cush drive bobbins from separating and causing damage to the eccentric rear hub. This is a known weak point on rear cush drives and eliminated by this sprocket adapter.
This will fit the following models.
Fitting a quick release sprocket adapter means no more reaching for a 41mm socket to remove the sprocket carrier when changing the rear sprocket.
Changing a rear sprocket with one of these fitted is done with minimal tools in a matter of minutes. Learn More -
Details
JT Sprockets 525 pitch 15 tooth front sprocket for Ducati 749 848 998 999 1098 1198 Streetfighter Monster S4R Hypermotard Multistrada Diavel JTF741.15
Price:£15.46New 15 tooth 525 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 15 tooth 525 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Great quality replacement spare service part for your Ducati motorcycle. Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More