Ducati 848
Ducati 848 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
JT Sprockets 36 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.36
Price:£18.48New 36 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 36 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Filtrex oil filter for Ducati 748 916 996 998 749 999 848 1098 1198 Monster Hypermotard Multistrada
Price:£9.99Filtrex Heavy Duty Hi Flow filters are supplied to Major original equipment manufacturers worldwide; with further compliance to Japanese Industry standards.
Choose an Original Equipment product at a fraction of the price.
To fit all years and models of the machines listed below
Learn More -
Details
SBS Front brake pads for Ducati - Sintered Radial calipers 841HS
Price:£21.18Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
JT Sprockets 40 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.40
Price:£29.21New 40 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 40 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
Renthal grip glue for handle bar grips G101
Price:£5.99Renthal highly developed grip glue, specially formulated to give a secure bond without damaging the grip.
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Swing Arm Pivot Seal Rings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:£7.27NTN Brand new top quality pair of swing arm pivot seals for Ducati machines.
These fit on the swing arm each side of the needle roller bearings.
Equivalent Ducati part no 0412.02.295 or also 930.5.012.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
SBS Race Sinter Front brake pads Ducati Twin pin caliper 706RS
Price:£25.15Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
Fuchs Renolit red rubber grease G51 - 500g - brake caliper seals
Price:£13.20Fuchs Renolit red rubber grease G51 - 500g for brake caliper seals
A special rubber compatible grease or use on hydraulic brake and clutch components where hardening or swelling of rubber must be avoided.
It is designed to assist in the assembly of rubber components for brake, clutch and suspension units and is suitable for natural and synthetic rubbers.
This product is highly resistant to petrol and other chemical attack, mechanical and thermally stable.
This product is ideal for use with the following:
• Hydraulic components
• Rubber components
• Rubber seals
• Motorcycle brake caliper assemblies
• Petrol resistant applications
• For lubricating and servicing oil resistant seals
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Clutch lever for Ducati 749 848 999 1098 1198 Panigale Streetfighter Monster S4RS 1100 Diavel Radial version in silver chrome finish
Price:£29.99This is a brand new clutch lever in silver chrome finish.
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost.
This is the radial type to fit the models listed in the pull down box below.
We also have levers in our shop to suit earlier model Ducati's. Learn More