Service Parts
We have a large stock of service items to help keep your pride and joy running in tip top condition.
-
Details
Genuine Ducati OEM cam timing belt tensioner pair of Fuji lock nuts 748 749 848 916 996 998 999 1098 1198 MTS 1200 HYM 821 939 Supersport 950 Diavel Streetfighter 74940081A or 729908FN1
Price:£4.26Brand new genuine Ducati OEM M8 x 1.25mm cam belt tensioner lock nut pair. These will fit the following 4v engine Ducati models.
If you at all unsure, then please send us a message and we will help with fitment information.
Ducati OEM part number 74940081A or alternate part number 729908FN1
The photos in the listing are of the actual item offered for sale, please study them carefully prior to ordering.
Handy genuine Ducati OEM replacement spare parts for your motorcycle. Learn More -
Details
Genuine Ducati OEM steering stem headstock bearing seal for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s 93010041B
Price:£5.94Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.
These are supplied singularly and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 3 & 4 500ml 102718
Price:£7.81MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More -
Details
EBC HH Sintered Front brake pads for Ducati Aprilia MV Agusta Cagiva 4 pad calipers - FA322/4HH
Price:£33.88EBC Double HH Sintered front Pads - FA322/4HH
Made in EBC Brakes manufacturing facility, Cleveland, USA, state of the art manufacturing facility, the “Double-H” sintered pads have set the levels by which all other pads are now judged in the European market. Boasting the highest “HH” friction rating and a lifetime which is the envy of our competition, the “Double-H” pads are extended in their application range for this year and are available in a new quieter running, faster bedding formulation, further raising the attractive commercial features of this already top selling product line.
• Highest friction HH rated for MAXIMUM stopping power.
• Made from Sintered copper alloy like Original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold.
• Where required unique STAINLESS STEEL radiator plates fitted to reduce heat transfer into bikes hydraulics.
• EBC unique design keeps pads cooler and prevents pad drag and overheat or fade.
This is one caliper set of EBC FA322/4HH Sintered (HH) compound front brake pads to fit all of the machines in the pull down list below.
The exact format of the pads are as shown in the image Learn More -
Details
MOTUL Motocool Expert coolant 1 litre ready to use 105914
Price:£9.60Motul radiator fluid Motocool Expert 1 litre
Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.
Nitrite free / Amine free / Phosphate free
Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used
Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142
Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
JT Sprockets 42 tooth 520 pitch steel rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTR751.42
Price:£17.95New 42 tooth 520 pitch steel rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 42 tooth 520 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225313338
Part number: JTR751.42 Learn More -
Details
JT Sprockets 38 tooth 520 pitch steel rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTR751.38
Price:£15.17New 38 tooth 520 pitch steel rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 38 tooth 520 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225313321
Part number: JTR751.38 Learn More -
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:£26.84Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More -
Details
New Throttle cable Ducati 748 916 996 94-04 BP S SP SPS R E gas gaszug accelerator
Price:£15.17Brand new top quality replacement throttle cable to fit the Ducati models listed below.
Equivalent to OEM part number 65610132A or alternate part number 412810097.
*Please note* this is a high quality European sourced pattern part and not an OEM part.
The image is of an actual cable offered.
The look of the cable differs very slightly from that of the OEM, but the size and use are the same as the OEM. A good value replacement part for your pride and joy. Learn More -
Details
NEW speedo cable for Ducati 748 916 996 998 94-04 BP S SP SPS E speedometer ODO
Price:£11.60Brand new high quality replacement speedo cable to fit the Ducati models listed below.
Equivalent to OEM part number 40310071A.
*Please note* this is a high quality European sourced pattern part and not an OEM part.
The image is of an actual cable offered.
The look of the cable differs slightly from that of the OEM, but the size and use are the same as the OEM. A good value replacement part for your pride and joy.
Handy low cost replacement of your cable when the tyre fitters have not fitted your speedo drive correctly after a tyre change and yours then breaks. Learn More