Ducati 748
Ducati 748 Parts
We have an extensive range of parts available for these models of Ducati. Please browse the categories below for each product to fit your machine.
-
Details
Ducati rear paddock stand PIN - 21.5mm - 748 848 916 996 998 Hypermotard 796 1100 Monster 796 S2R S4R S4Rs Multistrada 1000 1100 PMD-01
Price:£20.96This is brand new Bike-Lift aluminium 21.5mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
This is a pin kit from the Italian manufacturer Bike-Lift. These are dimensionally correct to use with both the BikeTek rear paddock stand and also the Bike-Lift stand too.
These are an ideal alternate to the steel pin that we also sell. As these are aluminium, there will never be a problem with the pin rusting onto the inside of the rear spindle.
These are also handy as they are so light by comparison to the steel pin we also have available, coming in at only 265g.
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
We also have pins in different sizes to fit these stands should you require them for a different machine than listed above. Learn More -
Details
20mm Round Self Adhesive Red Reflector Stick On ideal Motorcycle number plate or MOT
Price:£1.50● This is a single 20mm round self adhesive stick on red reflector.
● These are ideal if you have fitted a tail tidy and just need a reflector on the rear of your machine for the MOT.
● Self adhesive, so can be fitted in a variety of locations all over the machine, including one on the rear for MOT requirements.
● Must have for those with chopped or tidied rear ends on their bikes. Learn More -
Details
All Balls Racing fork dust seals 43mm Showa for Ducati 748 749 916 996 998 999 Monster 600 750 900 S2R S4R 1000 Multistrada ST3 ST4 Supersport
Price:£15.19This is a pair of All Balls Racing fork dust seals to fit Showa 43mm forks.
These are suitable for the Ducati models in the pull down list below
Please note: These are to fit the models listed above with 43mm Showa forks only and these do not fit Ohlins fork models. Learn More -
Details
Athena exhaust gasket for Ducati 748 851 888 916 996 Monster S4 S4R 996cc ST4 ST4S S410110012003
Price:£4.26Brand new exhaust gasket.
As per Ducati OEM part number 79010012A and 79010011A
This is to fit the models as below
The gaskets are manufactured by Athena in Italy, to European quality standard ISO 9000 and are under constant quality control.
A handy low cost spare parts to help keep your machine running tip top.
EAN number: S410110012003
Part number: 7344203 Learn More -
Details
JMP front sprocket retaining plate for Ducati 748 851 888 916 996 Monster Supersport Scrambler ST2 ST4 Multistrada 620 SL MH900e
Price:£7.26Brand new front sprocket retaining washer plate made by JMP in Germany.
This will fit the following Ducati models.
Equivalent to OEM part number 826.1.011.1A or alternate number 067016105
A handy low cost spare part for your pride and joy. Learn More -
Details
Front wheel speedo drive plate seal for Ducati 748 916 996 998 ST2 ST4 SS 750 900 ie
Price:£6.98Brand new top quality front wheel seal for Ducati machines.
This fits on the front wheel, to trap the speedo drive plate in place.
This is an upgraded version to the original as it is fully rubber sealed and is otherwise equivalent to Ducati OEM part number 79110221A, 000056741 and 800056741
These are ONLY to fit the Ducati models listed in the pull down box below.
Please note: seal colour may vary from that in the photo.
A handy low cost spare part for your pride and joy. Learn More -
Details
JT Sprockets 16 tooth front sprocket for Ducati 748 851 888 906 Monster 400 600 620 695 696 750 797 800 900 SS SL 520 pitch 736.16
Price:£15.02New 16 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 16 tooth 520 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
JMP valve shim measuring tool for Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Streetfighter Diavel XDiavel Multistrada 1200 Scrambler
Price:£11.86Brand new top quality German Made JMP Tools valve shim measuring tool for Ducati Testastretta, Desmoquattro & 1000ds engined models with 7mm valves.
• This specially designed tool is purposely made for measuring the valve shims to accurately do your clearances
• For engines with 7mm valves
• One each for measuring the opening and closing shims
• Made in Germany
For use with the following Ducati models below:
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
NEW speedo cable for Ducati 748 916 996 998 94-04 BP S SP SPS E speedometer ODO
Price:£11.60Brand new high quality replacement speedo cable to fit the Ducati models listed below.
Equivalent to OEM part number 40310071A.
*Please note* this is a high quality European sourced pattern part and not an OEM part.
The image is of an actual cable offered.
The look of the cable differs slightly from that of the OEM, but the size and use are the same as the OEM. A good value replacement part for your pride and joy.
Handy low cost replacement of your cable when the tyre fitters have not fitted your speedo drive correctly after a tyre change and yours then breaks. Learn More -
Details
JMP Rear Wheel Nut Socket Tool Ducati 748, 848, 916, 996, 998, Streetfighter 848, Monster 796, S2R, S4R, 1100, Hypermotard, 821, MTS 1000 & 1100 MH900e
Price:£25.97Brand new top quality chrome vanadium 12 tooth 3/4" drive rear wheel nut socket, German Made JMP Tools.Learn More
Essential tool for the maintenance of your machine.
This is a substantial tool, weighing in at 560g.
This will fit the rear wheel nut of the following Ducati models.
This is to fit and use with the following Ducati models listed below.