Service Parts

NTN Brand new top quality pair of front wheel bearings for Ducati machines.

NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

Equivalent Ducati part no 702.5.045.1A and 75162.2566

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

New 38 tooth 525 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 38 tooth 525 pitch alloy rear JT sprocket

* Note * This is part of a 525 conversion on the Multistrada 1200, as they are 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Part number: 841DC
EAN number: 5703858736934


SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

New 40 tooth 520 pitch alloy rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:



Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch, rather than the OEM 525 pitch.

Please also note that this rear sprocket requires the use of a sprocket carrier adapter. We have these available should you not already have one. This sprocket will fit the JT sprocket carrier and also the Renthal sprocket carrier, but no other brand of sprocket carriers. Please call or email us should you require further information regarding possible fitment.

This will fit the following models.


* 40 tooth 520 pitch alloy rear JT sprocket

* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM, depending upon model. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.

This is 1 litre of Motul Expert fork oil 15W medium-heavy weight.

• Hydraulic fork fluid for racing applications.

• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating

• Increased resistance to high temperatures eliminates lubricant oxidation

Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks

• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul

• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade

• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency

• Anti-wear and extreme pressure resistant properties

• Anti-corrosion additive protects seals and valves

• Motul Fork Oil Factory Line can be mixed to obtain the required absorption

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650008417
Part number: 105931 Learn More

NTN Brand new top quality pair of swing arm pivot seals for Ducati machines.

These fit on the swing arm each side of the needle roller bearings.

Equivalent Ducati part no 0412.02.295 or also 930.5.012.1A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.

Learn More

The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.

This is 1 litre of Motul Expert fork oil 10W medium weight.

• Hydraulic fork fluid for racing applications.

• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating

• Increased resistance to high temperatures eliminates lubricant oxidation

Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks

• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul

• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade

• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency

• Anti-wear and extreme pressure resistant properties

• Anti-corrosion additive protects seals and valves

• Motul Fork Oil Factory Line can be mixed to obtain the required absorption

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650008424
Part number: 105930 Learn More

NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.

NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.

These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A

These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.



Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More