We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
This is brand new 40mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
The Ducati 1098 had two different versions of rear spindle. From May 07 onwards it used one that will use this 40mm pin for the stand. All machine before May 07 use a 42mm pin, please look at our other items for this. If you are unsure, please measure the left hand side of the rear spindle to confirm prior to ordering.
We also have pins in different sizes to fit these stands should you require one for a different machine. Learn More
New 15 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch rather than the OEM 525 pitch.
This will fit the following models.
* 15 tooth 520 pitch steel front JT sprocket
* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM. So you would need to convert all of the final drive on those models.
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More
Brand new Pipercross performance air filter.
This simply replaces the OEM air filter part number 42610251A or later revised part no 42610191A
A very good life time warranty upgrade and an instant performance upgrade.
To fit the Ducati models as the list below
High Performance lifetime upgrade replacement spare service part for your Ducati motorcycle. Fits the same as the OEM unit for quick and easy replacement, whilst adding performance. Learn More
New 14 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 14 tooth 520 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More
New 42 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following machines.
* 42 tooth 520 pitch steel rear JT sprocket.
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225310030
Part number: JTR735.42 Learn More
Brand new pair of Ariete forks seals to fit the Ducati models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 41.7 x 55 x 10/10.5mm
Equivalent to Ducati OEM part numbers 000041394, 14066, 800041394
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513535482
Part number: ARI028 Learn More
Brand new Pipercross performance air filter.
This simply replaces the OEM air filter 42610091A or earlier part number 3709.8610 for an instant performance upgrade.
A very good life time warranty and performance upgrade at not much more than OEM filter cost.
This Pipercross Performance air filter fits the Ducati models listed below
Brand new Billet alloy swing arm spool bobbins in anodized black finish.
To fit motorcycles with M8 x 1.25mm swing arm threads.
● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand
Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.
Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.
Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.
We have a wide selection of colours and sizes available for these, please browse around shop. Learn More
Details
Details
Details
Details
Details
Details
Details
Details
Details
Details