Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
JMP Rear Wheel Nut Socket Tool Ducati 748, 848, 916, 996, 998, Streetfighter 848, Monster 796, S2R, S4R, 1100, Hypermotard, 821, MTS 1000 & 1100 MH900e
Price:£25.97Brand new top quality chrome vanadium 12 tooth 3/4" drive rear wheel nut socket, German Made JMP Tools.Learn More
Essential tool for the maintenance of your machine.
This is a substantial tool, weighing in at 560g.
This will fit the rear wheel nut of the following Ducati models.
This is to fit and use with the following Ducati models listed below.
Details
JMP crankshaft turning tool & degree wheel Ducati 748 749 848 851 888 916 996 998 999 1098 1198 Monster Multistrada Hypermotard Supersport Streetfighter Diavel
Price:
£68.14
Brand new top quality German Made JMP crank shaft turning & setting tool with degree wheel for Ducati models.
• Suitable for virtually all Ducati engines built from 1990 to present, excluding Panigale.
• Invaluable for turning the engine while setting the rocker arm shims.
• Time Saver.
• This specially designed tool allows you to rotate the engine to allow correct tensioning of the cam belts after replacement.
• This comes with the Degree wheel, allowing you to see the correct position of the engine.
• Strong tool, ideal for both home or professional workshop use.
• Made in Sheffield, UK
This is a direct equivalent to the Ducati tool part no. 88765.1523 or also 88713.0123 and 98112.0002
The tool allows the rotating of the engine via the crank end on the Ducati models as per the list below.
Learn More
• Suitable for virtually all Ducati engines built from 1990 to present, excluding Panigale.
• Invaluable for turning the engine while setting the rocker arm shims.
• Time Saver.
• This specially designed tool allows you to rotate the engine to allow correct tensioning of the cam belts after replacement.
• This comes with the Degree wheel, allowing you to see the correct position of the engine.
• Strong tool, ideal for both home or professional workshop use.
• Made in Sheffield, UK
This is a direct equivalent to the Ducati tool part no. 88765.1523 or also 88713.0123 and 98112.0002
The tool allows the rotating of the engine via the crank end on the Ducati models as per the list below.
Details
JMP eccentric rear hub chain adjusting tool Ducati 748 848 916 996 998 MH900e Streetfighter 848 1199 1299 Multistrada 1000 1100 1200 Hypermotard Monster S2R S4R S4Rs 1200 MV Agusta F3 F4 Brutale
Price:
£11.12
Brand new top quality German Made JMP Tools eccentric rear hub adjusting tool for single sided Ducati and MV Agusta models.
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK
This is a direct equivalent to the Ducati tool part no. 88713.1038
The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.
Learn More
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK
This is a direct equivalent to the Ducati tool part no. 88713.1038
The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.
Details
SBS Carbon Tech Rear brake pads for Ducati 749 848 899 999 1098 1198 1199 Panigale Streetfighter Hypermotard 730RQ
Price:
£24.24
Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
SBS RQ rear brake pads are designed for riders using the rear brake to help steer into turns and handle the bike out of turns.
This is one caliper set of Carbon Tech (RQ) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
SBS RQ rear brake pads are designed for riders using the rear brake to help steer into turns and handle the bike out of turns.
This is one caliper set of Carbon Tech (RQ) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More
Details
New Throttle cable Ducati 748 916 996 94-04 BP S SP SPS R E gas gaszug accelerator
Price:
£15.17
Brand new top quality replacement throttle cable to fit the Ducati models listed below.
Equivalent to OEM part number 65610132A or alternate part number 412810097.
*Please note* this is a high quality European sourced pattern part and not an OEM part.
The image is of an actual cable offered.
The look of the cable differs very slightly from that of the OEM, but the size and use are the same as the OEM. A good value replacement part for your pride and joy. Learn More
Equivalent to OEM part number 65610132A or alternate part number 412810097.
*Please note* this is a high quality European sourced pattern part and not an OEM part.
The image is of an actual cable offered.
The look of the cable differs very slightly from that of the OEM, but the size and use are the same as the OEM. A good value replacement part for your pride and joy. Learn More
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:
£26.84
Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More
Details
New throttle control & grips Ducati 748 916 996 998 ST2 ST3 ST4 SS ie Monster S2R S4 S4RS 620 750 900 1000 SS MH900e gas gaszug accelerator
Price:
£60.98
Brand new throttle control twist grip and left grip set made by Domino in Italy.
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati. The throttle control is fitted with the OEM grip and comes with left grip as well, as shown.
This is virtually identical in fitment to the OEM Ducati part number 400520388 or 65420021A for Ducati 748, 916 & 996 models, except this has no fast idle button and also has Domino on the top of the throttle cable cover, as shown.
This is the same as the Ducati 998, ST, SS and Monster part number 65420031A, as those Ducati models had no fast idle button.
Handy Italian made spare part for your Ducati. Learn More
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati. The throttle control is fitted with the OEM grip and comes with left grip as well, as shown.
This is virtually identical in fitment to the OEM Ducati part number 400520388 or 65420021A for Ducati 748, 916 & 996 models, except this has no fast idle button and also has Domino on the top of the throttle cable cover, as shown.
This is the same as the Ducati 998, ST, SS and Monster part number 65420031A, as those Ducati models had no fast idle button.
Handy Italian made spare part for your Ducati. Learn More
Details
New throttle control grip assembly Ducati 851 888 Supersport 900 907 ie gas gaszug accelerator
Price:
£36.30
Brand new throttle control twist grip assembly made by Domino in Italy.
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati.
This is identical in fitment to the OEM Ducati part number 400520055 or earlier part numbers 000066776, 8A0066776, 800066776 and 000012056.
The photos in the listing are of the actual item and the throttle control comes without a grip fitted, as shown.
Handy Italian made spare part for your Ducati. Learn More
This is to fit the Ducati models as below
Domino make and supply many OEM manufacturers with throttle controls and twist grips, including Ducati.
This is identical in fitment to the OEM Ducati part number 400520055 or earlier part numbers 000066776, 8A0066776, 800066776 and 000012056.
The photos in the listing are of the actual item and the throttle control comes without a grip fitted, as shown.
Handy Italian made spare part for your Ducati. Learn More
Details
JT Sprockets 42 tooth steel rear sprocket for Ducati 848 916 996 998 Monster 796 1100 Hypermotard 1100 Multistrada 525 pitch JTR752.42
Price:
£23.76
New 42 tooth 525 pitch steel rear sprocket by JT Sprockets
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 42 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 42 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
Details
JT Sprockets 36 tooth steel rear sprocket for Ducati 848 916 996 998 Monster 796 1100 Hypermotard 1100 Multistrada 525 pitch JTR752.36
Price:
£21.74
New 36 tooth 525 pitch steel rear sprocket by JT Sprockets
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is the actual sprocket offered, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 36 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is the actual sprocket offered, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 36 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More