Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
SBS Race Sinter Front brake pads Ducati 4 pad calipers 762RS
Price:£38.09Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
JT Sprockets 44 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.44
Price:£26.48New 44 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 44 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
SBS 841DC Dual Carbon Front brake pads
Price:£38.89The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.
Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!
This is one caliper set of Dual Carbon (DC) compound front brake pads.
These are to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Part number: 841DC
EAN number: 5703858736934
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team
BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.
When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.
When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More -
Details
JT rear Sprocket 520 38 tooth Ducati 851 888 Monster 400 600 620 695 696 750 800 900 907 Paso JTR735.38
Price:£15.80New 38 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following machines.
* 38 tooth 520 pitch steel rear JT sprocket.
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225306170
Part number: JTR735.38 Learn More -
Details
NGK Iridium IX® Spark Plug CR9EIX
Price:£15.89NGK Iridium IX® Spark plug type CR9EIX
The Spark Plug Serious Enthusiasts Rely On.
Designed specifically for the performance enthusiast. Iridium IX® offers extreme ignitability, improved throttle response and superior anti fouling.
● Fine Iridium tip ensures high durability and a consistently stable spark
● Iridium alloy has extremely high melting point, perfect for today’s high-tech, high-performance engines
● Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties
● Outstanding acceleration, high fuel efficiency and durability
● Ultimate design, technology and performance.
This will fit the following motorcycle models:
If you are unsure as to which spark plug you need, then please email us or try out the NGK Partfinder website Learn More -
Details
Renthal grip glue for handle bar grips G101
Price:£5.99Renthal highly developed grip glue, specially formulated to give a secure bond without damaging the grip.
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Ducati front and rear paddock stand set 748 848 916 996 998 Hypermotard 796 821 939 1100 Monster S2R S4R S4RS Multistrada 1000 1100
Price:£145.42This is brand new Front & Rear Paddock Stand set for single sided swing arm models
This is a set of paddock stands, one front and one rear.
Paddock stands are suitable for general maintenance and repair work. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.
We also have these listed in our shop as a rear stand on it's own, should that be required instead.
This rear stand fits the Ducati models with single sided swing arm as the list below.
Front stand is universal so could easily be used on a variety of other bikes.
Front stand has spring loaded quick release under fork adaptors.
Heavy duty nylon wheels.
These stands are NOT intended for storage use.
Tough powder coated red finish. Learn More -
Details
Silver front brake lever for Ducati 748 851 888 916 996 Monster ST2 Supersport - Early 12mm pivot axial version
Price:£29.99This is brand new front brake lever in silver chrome finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are suitable for Ducati as per the list below
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost. Learn More -
Details
Motorcycle Drive Chain Cleaning Brush CHBBSH02
Price:£10.00
Dual headed chain brush for easy agitation of dirt when cleaning your motorcycle final drive chain
Chain maintenance is key to getting the most out of your motorcycle and also extending the life of your chain.
Suitable for use with most chain cleaning products.
The shape of the brush head allows you to clean 3 sides of the chain simultaneously, which will speed up the job at hand.
The long bristles at the other end allow the user to clean hard reach areas.
We also have replacement brush heads available for this item:
Click here for replacement brush heads
EAN number: 5034862213600
Part number: CHBBSH02 Learn More -
Details
Ducati Billet Clutch Slave Cylinder Oberon Performance CLU-0116 (Special Order Part)
Price:£112.50This replacement Ducati clutch slave cylinder has been designed to improve the performance and the looks of the original Ducati cylinder.
This is a very well engineered and detailed product.
Substantially reducing the heaviness of the original clutch action, aching arms and clunky gear changes are a thing of the past. The internal piston design, seals and breather hole have been drastically enhanced to stop leaks and leave a smoother clutch action. CNC machined from billet for lightness, strength and precision looks.
Everything you need is included in the kit, plus a conversion shaft 'extension piece' for earlier bikes that use the shorter clutch push rod.
Direct fit for ALL external slave cylinder models as per the models listed below.
The clutch slave cylinder also includes mounting screws and banjo washers. So it's a ready to fit kit.
Available in a choice of six colours, in order that you may compliment your machine whilst upgrading. Learn More