We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
This is a brand new fuel pump assembly base plate flange O ring - Viton.
Viton is the correct material for this O ring to be fuel safe, beware of inferior O rings listed in different materials.
To fit only the Ducati models and years listed in the pull down box below.
Equivalent to Ducati OEM part number 88640491A or alternate part number 88641881A
Models other than those listed have a different sized fuel pump baseplate, this is to suit the larger 107mm baseplate and not the 88mm baseplate.
Please note: this is not an OEM part and is a directly equivalent pattern part.
Handy replacement service spare part for your Ducati motorcycle. Learn More
Brand new Athena outer generator cover gasket. Made by Athena in Italy. This is to fit the Cagiva models as below
This is directly equivalent to the Cagiva OEM part number 800052292
The gaskets are manufactured to European quality standard ISO 9000 and are under constant quality control. High quality materials and the use of Reinz and Elring sealing paper speak for itself.
The item pictured is of the actual gasket provided.
Handy low cost spare parts to help keep your machine running tip top. Learn More
NTN Brand new top quality set of 4 swing arm pivot needle bearings and seals for Ducati machines.
The seals in the kit are upgraded double lipped R23 gator sprung seals, in order to help prevent water ingress into the bearings and shaft and provide a longer lasting replacement.
Equivalent Ducati part no bearings 400520202 or earlier part number 76400.0004, seals 93041271A or earlier part numbers 937832026 & 075549265 & 400520117
These are supplied as a set of 4 and are to fit the the crankcase for the swing arm on Ducati models listed in the pull down box below.
Handy replacement spare service parts for your Ducati motorcycle. Learn More
Brand new top quality German Made JMP Tools generator cover removal tool.
Suitable for easy removal of the generator cover on your motorcycle.
They make the whole job a doddle by comparison to doing the job without. We use this same tool in our own workshop.
• Made from 6061 aluminium with steel screws
• Removes cover without damage
• Essential when removing the left side engine casing
• Manufactured by JMP Tools in Germany
• Time saver.
• Including M10 x 1,25 x 80 mm inner hex. screw and 2 x M6 x 1.0 x 30 mm hexagon head screws
• Essential tool.
This is a direct equivalent to the Ducati tool part no. 88713.0144
The tool allows the easy removal of the alternator / generator cover on all of the Ducati models as per the list below.
A very handy tool to have in your kit, helping you to maintain your machine correctly. Learn More
Details
Details
Details
Details
Details
Details
Details
Details
Details
Details