Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
30m of 0.7mm Safety Lock Wire, ideal for ACU Racing or trackday requirements
Price:£9.9930m of 0.7mm Lock Wire.
Ideal for adding lockwire features to your bike for the race look.
It is required for ACU racing regulations to lockwire certain components.
We also have the lock wire tool and a 127m reel of 0.8mm lock wire and also lock wire tools available. Learn More -
Details
JT Sprockets 36 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.36
Price:£18.48New 36 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 36 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
NTN Eccentric rear hub needle roller bearing for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£29.99This is an NTN needle roller bearing to fit inside the eccentric rear hub.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A on the Supersport/Superbike models. This will also fit the larger eccentric rear hub as found on the single sided Multistrada, Hypermotard and Monster models with rear hub part number 756.2.006.1A or revised part number 756.2.006.2A
To fit the Ducati models listed in the pull down box below.
Learn More -
Details
BikeTek universal front paddock stand
Price:£49.99This is brand new universal front Paddock Stand from BikeTek
The series 3 paddock stands utilise a unique design to create a sturdier and stronger stand, the revised handle shape offers better handling for lifting motorcyles.
The BikeTek Front Paddock Stand allows easy and safe lifting of front wheels for most repair and maintenance jobs. Extra heavy duty construction, this stand is available in red finish and supplied with front under-fork adaptors.
Features:
* Spring loaded quick release under fork adaptors
* Heavy Duty oil resistant wheels
* Protective rubber base bungs
* Tough powder coated red finish
Front paddock stands MUST be used in conjunction with a rear paddock stand. Learn More -
Details
JT Sprockets 39 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.39
Price:£28.24New 39 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 39 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
Filtrex Performance Air filter for Ducati Monster 400 620 695 750 800 900 1000 S2R S4 S4R S4Rs 800SS AIRD003
Price:£43.19New to the FILTREX range comes a performance replacement air filter product guaranteed to increase horsepower and acceleration.
Professionally engineered with a premium filtration material set within a high specification chassis, Filtrex will deliver increased performance and longevity over OEM and other aftermarket filters.
This simply replaces the OEM air filter (426.1.011.1A) for an instant performance upgrade.
This Filtrex Performance air filter fits the Ducati models listed below
Learn More -
Details
NTN Front wheel bearings for Ducati - PAIR
Price:£14.68NTN Brand new top quality pair of front wheel bearings for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 702.5.045.1A and 75162.2566
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
JT Sprockets 15 tooth front sprocket for Ducati 520 pitch conversion 749 848 998 999 1098 1198 JTF742.15
Price:£14.28New 15 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch rather than the OEM 525 pitch.
This will fit the following models.
* 15 tooth 520 pitch steel front JT sprocket
* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
Fuchs Renolit red rubber grease G51 - 500g - brake caliper seals
Price:£13.20Fuchs Renolit red rubber grease G51 - 500g for brake caliper seals
A special rubber compatible grease or use on hydraulic brake and clutch components where hardening or swelling of rubber must be avoided.
It is designed to assist in the assembly of rubber components for brake, clutch and suspension units and is suitable for natural and synthetic rubbers.
This product is highly resistant to petrol and other chemical attack, mechanical and thermally stable.
This product is ideal for use with the following:
• Hydraulic components
• Rubber components
• Rubber seals
• Motorcycle brake caliper assemblies
• Petrol resistant applications
• For lubricating and servicing oil resistant seals
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More