Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
Silkolene Super 4 Semi Synthetic 1L 10w40 motorcycle engine oil S600986087
Price:£11.28The Silkolene Super 4 10W-40 1 Litre is a semi-synthetic 4-stroke engine oil, with MC-Syn Technology, for all modern motorcycles.
This incorporates detergents, dispersants and load carrying agents to give excellent engine cleanliness and minimum wear of moving parts and contains a balanced blend of inhibitors and anti-wear agents to ensure correct operation of oil immersed clutches and other drive line components.
The advanced additive chemistry protects the engine and transmission from start-up to full power.
Specifications: API 4-Cycle Performance, Spec. SF and SG and JASO MA and MA2.
• Incorporates detergents, dispersants and load carrying agents
• Minimum wear of moving parts
• Contains a balanced blend of inhibitors
• Advanced additive chemistry
• Protects the engine
This is 1 litre of Silkolene Super 4 Semi Synthetic motorcycle engine oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Swing arm pivot needle bearing kit for Ducati 851 888 Monster ST 2 3 4 Supersport Sport Classic MH900e
Price:£32.82NTN Brand new top quality set of 4 swing arm pivot needle bearings and seals for Ducati machines.
The seals in the kit are upgraded double lipped R23 gator sprung seals, in order to help prevent water ingress into the bearings and shaft and provide a longer lasting replacement.
Equivalent Ducati part no bearings 400520202 or earlier part number 76400.0004, seals 93041271A or earlier part numbers 937832026 & 075549265 & 400520117
These are supplied as a set of 4 and are to fit the the crankcase for the swing arm on Ducati models listed in the pull down box below.
Handy replacement spare service parts for your Ducati motorcycle. Learn More -
Details
Genuine Ducati front sprocket retaining plate for Ducati 748 851 888 916 996 Monster Supersport Scrambler ST2 ST4 Multistrada 620 SL MH900e
Price:£5.87Brand new Genuine Ducati front sprocket retaining washer plate
This will fit the following Ducati models.
OEM part number 826.1.011.1A or alternate number 067016105
A handy low cost spare part for your pride and joy. Learn More -
Details
Fuel pump O ring Viton assembly base plate flange seal for Ducati Hypermotard 796 1100 Monster 620 695 696 S2R S4R 1100 Multistrada 620 1000 1100 88640491A
Price:£5.50This is a brand new fuel pump assembly base plate flange O ring - Viton.
Viton is the correct material for this O ring to be fuel safe, beware of inferior O rings listed in different materials.
To fit only the Ducati models and years listed in the pull down box below.
Equivalent to Ducati OEM part number 88640491A or alternate part number 88641881A
Models other than those listed have a different sized fuel pump baseplate, this is to suit the larger 107mm baseplate and not the 88mm baseplate.
Please note: this is not an OEM part and is a directly equivalent pattern part.
Handy replacement service spare part for your Ducati motorcycle. Learn More -
Details
Black front brake & clutch lever pair set for Ducati 748 851 888 916 996 Monster ST2 Supersport - Early 12mm pivot axial version
Price:£49.99This is brand new pair of control levers in matt black finish.
These are the earlier axial lever type to suit models that are fitted with master cylinders that have a 12mm pivot bolt size.
These are suitable for Ducati as per the list below.
Genuine levers are incredibly expensive. We have a pair of top quality replica replacement levers here at a fraction of the cost. Learn More -
Details
Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSWPL12
Price:£17.99Brand new manual twist safety lock wire tool.
Ideal for adding lockwire features to your bike for the race look. Also required for ACU racing regulations to lockwire certain components.
This comes complete with 30m of 0.8mm lock wire, so is a ready to go kit.
A must have for race or track day use. Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 5.1 500ml 100950
Price:£10.50MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 13593 Learn More -
Details
Single banjo brake light switch pressure M10 x 1.00mm Ducati Aprilia Cagiva fine pitch OPS015
Price:£19.99Brand new BikeTek banjo fitting brake light switch in size M10 x 1.00mm.
This is a single length banjo switch, so it is suitable for use on rear brake systems or also front brake systems that have only one banjo line at the master cylinder. It could also be used for some hydraulic clutch applications too.
Ideal for Italian machines such as Ducati, Aprilia and Cagiva that use Brembo parts as these are generally this size on their banjo's.
If you at all unsure, then please send us a message and we will help with fitment information.
Handy replacement spare electrical service part for your Ducati, Aprilia or Cagiva motorcycle.
EAN number: 5034862352996
Part number: OPS015 Learn More -
Details
Wurth high performance dry chain lube aerosol spray - 500ml UK Best Selling
Price:£10.00Wurth high performance dry chain lube.
Features:
• Transparent, high-pressure resistant, highly adhesive lubricant.
• Prevents running noise and wear.
• Forms a quick-drying, tough-elastic lubricating and protective film.
• Does not attack Perbunan O-rings.
• Resistant to water, steam, acids and bases.
• Protects against corrosion.
• Targeted dosing to inaccessible locations also possible.
• Can also be applied to running machinery, since the user's hands always remain outside the hazard zone.
Please Note: Shortly after being sprayed on, the product forms a highly effective, wax-based lubricating film, thereby ensuring optimum protection against lubrication.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid / oil items by Airmail. Learn More -
Details
Fork Oil Motul Factory Line ester based synthetic Medium 10W - 1 Litre 105925
Price:£22.46The ultimate high performance fork oil designed to squeeze every drop of performance and durability from your fork.
This is 1 litre of Motul Factory Line fork oil 10W medium weight.
• Hydraulic fork fluid for racing applications.
• Resistance to high temperatures with a coating that remains consistent thanks to the specifications of the synthetic esters: these molecules adhere to the metallic parts of the forks internals thus reinforcing the resistance of the oil coating
• Increased resistance to high temperatures eliminates lubricant oxidation
Specially formulated to work with Showa, Kayaba, Ohlins, WP and Solva upside down or conventional telescopic forks
• Reduces internal friction, especially between fork tubes, bushes, and seals thanks to the exclusive anti-friction additive designed and developed by Motul
• Outstanding suspension performance and consistency is maintained over long distance with minimal heat fade
• High performance anti-foam formula eliminates air transfer to the bladder to maintain suspension consistency
• Anti-wear and extreme pressure resistant properties
• Anti-corrosion additive protects seals and valves
• Motul Fork Oil Factory Line can be mixed to obtain the required absorption
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650008349
Part number: 105925 Learn More