Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
Genuine Ducati OEM steering stem headstock bearing seal for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s 93010041B
Price:£5.94Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.
These are supplied singularly and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More -
Details
JMP Tools eccentric steering head adjusting tool 748 749 916 996 998 999 887131037
Price:£28.43Brand new top quality German Made JMP Tools eccentric steering head adjusting tool.
This is used to adjust / rotate the eccentric steering head on the Ducati models as listed below:
• Strong tool, yet light enough to carry under your seat
• Manufactured by JMP in Germany
• Time saver
• Essential tool
• As per Ducati OEM tool part number 88713.1037
Handy factory equivalent tool to maintain and service your Ducati motorcycle. Learn More
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 3 & 4 500ml 102718
Price:
£7.81
MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More
Details
JT Sprockets 39 tooth steel rear sprocket for Ducati 848 916 996 998 Monster 796 1100 Hypermotard 1100 Multistrada 525 pitch JTR752.39
Price:
£24.24
New 39 tooth 525 pitch steel rear sprocket by JT Sprockets
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is the actual sprocket offered, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 39 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
This is a new product on the market and JT Sprockets are the first brand making steel sprockets to fit the quick release carrier system.
This is literally the best of both worlds, as you can have the cost and time saving of the quick release sprocket, whilst still having the durability of a steel sprocket.
The photo above is the actual sprocket offered, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 39 tooth 525 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More
Details
EBC HH Sintered Front brake pads for Ducati Aprilia MV Agusta Cagiva 4 pad calipers - FA322/4HH
Price:
£33.88
EBC Double HH Sintered front Pads - FA322/4HH
Made in EBC Brakes manufacturing facility, Cleveland, USA, state of the art manufacturing facility, the “Double-H” sintered pads have set the levels by which all other pads are now judged in the European market. Boasting the highest “HH” friction rating and a lifetime which is the envy of our competition, the “Double-H” pads are extended in their application range for this year and are available in a new quieter running, faster bedding formulation, further raising the attractive commercial features of this already top selling product line.
• Highest friction HH rated for MAXIMUM stopping power.
• Made from Sintered copper alloy like Original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold.
• Where required unique STAINLESS STEEL radiator plates fitted to reduce heat transfer into bikes hydraulics.
• EBC unique design keeps pads cooler and prevents pad drag and overheat or fade.
This is one caliper set of EBC FA322/4HH Sintered (HH) compound front brake pads to fit all of the machines in the pull down list below.
The exact format of the pads are as shown in the image Learn More
Made in EBC Brakes manufacturing facility, Cleveland, USA, state of the art manufacturing facility, the “Double-H” sintered pads have set the levels by which all other pads are now judged in the European market. Boasting the highest “HH” friction rating and a lifetime which is the envy of our competition, the “Double-H” pads are extended in their application range for this year and are available in a new quieter running, faster bedding formulation, further raising the attractive commercial features of this already top selling product line.
• Highest friction HH rated for MAXIMUM stopping power.
• Made from Sintered copper alloy like Original pads for longer life and perfect braking under all riding conditions, wet, dry, hot or cold.
• Where required unique STAINLESS STEEL radiator plates fitted to reduce heat transfer into bikes hydraulics.
• EBC unique design keeps pads cooler and prevents pad drag and overheat or fade.
This is one caliper set of EBC FA322/4HH Sintered (HH) compound front brake pads to fit all of the machines in the pull down list below.
The exact format of the pads are as shown in the image Learn More
Details
Number plate light for Ducati 748 916 996 998 Monster 600 620 695 750 800 900 1000 S2R S4 S4R ST2 ST3 ST4 Supersport
Price:
£12.76
This is a non OEM direct replacement numberplate light to fit the Ducati models in the list below
This is a direct replacement for Ducati OEM part number 525.1.004.3A or 52510042A or Aprilia part number AP8212702 and is virtually identical to the original part.
It has a cable length of approx 23cm and comes complete with fixing nuts and bulb.
A handy low cost replacement spare part for your pride and joy. Learn More
This is a direct replacement for Ducati OEM part number 525.1.004.3A or 52510042A or Aprilia part number AP8212702 and is virtually identical to the original part.
It has a cable length of approx 23cm and comes complete with fixing nuts and bulb.
A handy low cost replacement spare part for your pride and joy. Learn More
Details
JMP 1/2" female to 3/4" male socket adapter chrome vanadium
Price:
£10.20
Brand new top quality German made JMP Tools chrome vanadium socket adapter, 1/2" female to 3/4" male.
Ideal for use with the wheel nut sockets that we also have available
Essential tool for the maintenance of your machine.
The photos in the gallery are of the actual item offered for sale, please study them all carefully prior to ordering.
We have other tools for your Ducati in our shop, please take a look. Learn More
Ideal for use with the wheel nut sockets that we also have available
Essential tool for the maintenance of your machine.
The photos in the gallery are of the actual item offered for sale, please study them all carefully prior to ordering.
We have other tools for your Ducati in our shop, please take a look. Learn More
Details
MOTUL Motocool Expert coolant 1 litre ready to use 105914
Price:
£9.60
Motul radiator fluid Motocool Expert 1 litre
Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.
Nitrite free / Amine free / Phosphate free
Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used
Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142
Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More
Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.
Nitrite free / Amine free / Phosphate free
Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used
Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142
Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More
Details
Ducati rear tail light mounting rubber 748 916 996 998 buffer wedge pad block 86610181A
Price:
£4.72
Genuine Ducati OEM rear light rubber mounting block.
The image shows 2, so that you can more easily see around the item to identify it, but each item is for a single rubber block.
Ducati OEM part number 86610181A
To fit the following Ducati models
Learn More
The image shows 2, so that you can more easily see around the item to identify it, but each item is for a single rubber block.
Ducati OEM part number 86610181A
To fit the following Ducati models
Details
JT Sprockets 38 tooth 520 pitch steel rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTR751.38
Price:
£15.17
New 38 tooth 520 pitch steel rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 38 tooth 520 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225313321
Part number: JTR751.38 Learn More
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 38 tooth 520 pitch steel rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed.
Handy replacement spare service part for your Ducati motorcycle
EAN number: 824225313321
Part number: JTR751.38 Learn More