Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

This is one caliper set of Sintered (HS) compound front brake pads to fit all of the Ducati machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

SBS RQ rear brake pads are designed for riders using the rear brake to help steer into turns and handle the bike out of turns.

This is one caliper set of Carbon Tech (RQ) compound rear brake pads to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

Brand new top quality German Made JMP Tools eccentric rear hub adjusting tool for single sided Ducati and MV Agusta models.
• This specially designed, single sided swinging arm spanner has a longer handle than most similar tools with a total length of 265mm, making it even easier to use.
• Strong tool, yet light enough to carry under your seat
• Ideal replacement for the fiddly 2 piece OEM tool or also often missing from the tool kit on many used machines
• Made in Germany, UK

This is a direct equivalent to the Ducati tool part no. 88713.1038

The tool allows the adjustment of the drive chain on motorcycles fitted with single sided swinging arms, as per the list below.

Learn More

Brand new top quality chrome vanadium 12 tooth 3/4" drive rear wheel nut socket, German Made JMP Tools.

This tool will fit both the rear wheel and rear sprocket carrier side nuts and the Ducati and the wheel nut on the MV Agusta; essential tool for the maintenance of your machine.

This is a substantial tool, weighing in at 870g.

This is to fit and use with the following Ducati and MV Agusta models listed below.

Please select Ducati 1098 07-09 Ducati 1198 09-11 Ducati 1199 Panigale 12-14 Ducati 1299 Panigale 15-17 Ducati 1100 Panigale V4 18-19 Ducati 1100 Panigale V4S 18-19 Ducati 998 Panigale V4R 19 Ducati Diavel 1200 11-17 Ducati Diavel 1260 19 Ducati XDiavel 1260 16-19 Ducati Streetfighter 1098 09-13 Ducati Supersport 939 17-19 Ducati Multistrada 1200 09-18 Ducati Multistrada 1260 18-19 Ducati Monster 1200 15-19 MV Agusta Brutale 675 12-13 MV Agusta Brutale 800 13 MV Agusta Brutale 910 S 06-08 MV Agusta Brutale 910 R 06-08 MV Agusta Brutale 920 12 MV Agusta Brutale 989 R 09 MV Agusta Brutale 990 R 10-11 MV Agusta Brutale 1078 RR 09 MV Agusta Brutale 1090 RR 10-13 MV Agusta Brutale 1090 13 MV Agusta Brutale 1090 R 12-13 MV Agusta F3 675 12-13 MV Agusta F3 675 Oro 12-13 MV Agusta F4 750 SPR 1+1 01-04 MV Agusta F4 750 SPR 01-04 MV Agusta F4 750 S Brutale 03-05 MV Agusta F4 750 Brutale Oro 03-04 MV Agusta F4 750 Oro 99-00 MV Agusta F4 750 Senna 01-02 MV Agusta F4 750 S 1+1 Strada Biposto 99-02 MV Agusta F4 750 S 1+1 Strada Evo3 Biposto 03-05 MV Agusta F4 750 S Strada Evo3 Monoposto 03-05 MV Agusta F4 750 S Strada Monoposto 99-02 MV Agusta F4 1000 R 10-13 MV Agusta F4 1000 RR 12 MV Agusta F4 1000 R 07 MV Agusta F4 1000 R 1+1 07 MV Agusta F4 1000 312R 08 MV Agusta F4 1000 13 MV Agusta F4 1000 Ago 05 MV Agusta F4 1000 S 1+1 Biposto 05-07 MV Agusta F4 1000 S Monoposto 04-07 MV Agusta F4 1000 R Senna 06 MV Agusta F4 1000 Tamburini 04-05 MV Agusta F4 1078 312RR 09 MV Agusta Rivale 800 14