30m of 0.7mm Lock Wire.

Ideal for adding lockwire features to your bike for the race look.

It is required for ACU racing regulations to lockwire certain components.

We also have the lock wire tool and a 127m reel of 0.8mm lock wire and also lock wire tools available. Learn More

Brake bleeding assistor kit utilises a compact unit with 1-way non return valve and connector hoses that simply attach onto the bleed nipple.

When the nipple is open and brakes bled, the unit prevents air and old fluid from being pulled back into the system, freeing the user from having to repeatedly open and close the bleed nipple.

A very handy tool for bleeding the brakes on your own.
Can be used for bleeding all hydraulic brake and clutch systems on your motorcycle to easily service and repair your motorcycle.
The item comes with complete instructions on using it for bleeding your brakes. Learn More

Dual headed chain brush for easy agitation of dirt when cleaning your motorcycle final drive chain

Chain maintenance is key to getting the most out of your motorcycle and also extending the life of your chain.

Suitable for use with most chain cleaning products.

The shape of the brush head allows you to clean 3 sides of the chain simultaneously, which will speed up the job at hand.

The long bristles at the other end allow the user to clean hard reach areas.

We also have replacement brush heads available for this item:

Click here for replacement brush heads

EAN number: 5034862213600
Part number: CHBBSH02 Learn More

JMP Brake Caliper Piston Detaching Pliers Tool.

This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.

This tool has a 16.5mm to 40mm capacity.

We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.

These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.

Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.

EAN number: 4043981036961
Part number: 7224975 Learn More

Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm

This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.

To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.

• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.

A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More

Brand new top quality German Made JMP Piston Ring Installer Remover.

Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.

• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More

Brand new top quality spring puller tool from the BikeTek range of tool products.

Suitable for easy removal and installation of a variety of springs all over your motorcycle.

• Universal tool for both spring removal and refitting
• Applications include: exhaust springs, brake springs, side stand springs, centre stand springs, general return spring fitting tool
• Length 155mm, black powder coated finish
• Manufactured by BikeTek.
• Time saver.
• Essential tool. Learn More

Brand new top quality German Made JMP Tools valve shim measuring tool for Ducati 2 Valve engined models with 8mm valves.

• This specially designed tool is purposely made for measuring the valve shims to accurately do your clearances
• For engines with 8mm valves
• One each for measuring the opening and closing shims
• Made in Germany

For use with the following Ducati models below:

Please select Ducati MH900e 01-02 Ducati Monster 600 94-01 Ducati Monster 600 Dark 98-01 Ducati Monster 620 02-06 Ducati Monster 620 S 02-03 Ducati Monster 620 Dark 03-06 Ducati Monster 695 07-08 Ducati Monster 750 96-02 Ducati Monster 750 Dark 99-02 Ducati Monster 800 03-04 Ducati Monster 800 Dark 03-04 Ducati Monster 800 S 03-04 Ducati Monster S2R 800 06-07 Ducati Monster S2R 800 Dark 06-07 Ducati Monster 900 93-02 Ducati Monster 900 S 00-01 Ducati ST2 944 97-03 Ducati Multistrada 620 05-06 Ducati Multistrada 620 Dark 05-06 Ducati Sport 620 ie 03-04 Ducati Sport 750 ie 01-03 Ducati Sport 800 ie 03-04 Ducati Supersport 350 SS 91-93 Ducati Supersport 400 SS 93-95 Ducati Supersport 600 SS 94-98 Ducati Supersport 750 SS 94-98 Ducati Supersport 750 SS ie 99-02 Ducati Supersport 800 SS ie 03-04 Ducati Supersport 900 SS 90-98 Ducati Supersport 900 SS ie 99-02 Ducati 900 SS MHR Mike Hailwood Replica 79-82 Ducati 900 SS MHR II Mike Hailwood Replica 83-85 Ducati Pantah 350 SL 83-84 Ducati Pantah 350 TL 83-84 Ducati Pantah 350 XL 82-84 Ducati Pantah 500 SL 79-84 Ducati Pantah 600 SL 81-84 Ducati Pantah 600 TL 82-84 Ducati Pantah 650 SL 84-86 Ducati Indiana 650 86-90 Ducati Indiana 750 86-90 Ducati Sport 750 88-90 Ducati Paso 750 86-90 Ducati Paso 906 89-92 Ducati 907 ie 90-93 Ducati SL 900 92-97
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More

Brand new top quality German Made JMP crank shaft turning & setting tool with degree wheel for Ducati models.

• Suitable for virtually all Ducati engines built from 1990 to present, excluding Panigale.
• Invaluable for turning the engine while setting the rocker arm shims.
• Time Saver.
• This specially designed tool allows you to rotate the engine to allow correct tensioning of the cam belts after replacement.
• This comes with the Degree wheel, allowing you to see the correct position of the engine.
• Strong tool, ideal for both home or professional workshop use.
• Made in Sheffield, UK

This is a direct equivalent to the Ducati tool part no. 88765.1523 or also 88713.0123 and 98112.0002

The tool allows the rotating of the engine via the crank end on the Ducati models as per the list below.

Learn More