Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu-
Details
SBS 519LS Low Sinter rear brake pads
Price:£22.82Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Low Sinter (LS) compound rear brake pads to fit all of the machines in the pull down list below.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
SBS Race Sinter Front brake pads Ducati Single pin caliper 566RS
Price:£25.15Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
SBS Dual Carbon Front brake pads Ducati Single pin caliper 566DC
Price:£29.63The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.
Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!
This is one caliper set of Dual Carbon (DC) compound front brake pads.
These are to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team
BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.
When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.
When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More -
Details
HiFlo oil filter for Ducati 748 916 996 998 749 999 848 1098 1198 Monster Hypermotard Hyperstrada Diavel XDiavel ST2 ST3 ST4 Supersport Multistrada HF153
Price:£7.25HiFlo Filtro Premium Oil Filters
▪ OE Manufacturer - OE Specs plus performance
▪ Best Consumer Value - Best Quality and Price
▪ Constructed using the Best available Materials
▪ TUV Product Approved and Production Monitored
▪ Most Complete Range for ALL Motorcycles
Equivalent to Ducati OEM part numbers 44440038A, 44440037A, 44440035A, 44440321B, 44440034A, 44440032B, 44440031A, 090549960, 065149960, 44440171A
To fit all years and models of the machines listed below
Handy low cost replacement service part for your Ducati motorcycle.
EAN number: 824225110265
Part number: HF153 Learn More -
Details
HiFlo Racing edition oil filter for Ducati 748 916 996 998 749 999 848 1098 1198 Monster Hypermotard Multistrada HF153RC
Price:£9.06Hiflo Racing Oil Filter for most Ducati models except Panigale 1199.
The new Hiflo Racing oil filters have been developed to meet the high demands of racing meet.
This special Racing Filter is the only one worldwide approved and certified by TÜV in Germany.
These filters ensure high quality performance and vehicle excellent compatibility.
▪ High-performance filter material (3 times) fibres for optimum filtration and constant flow
▪ Robust construction; cartridge is made of steel
▪ 17mm hex for easy installation and quick removal
▪ No special tools required
▪ The hex on the end has a hole for lock wire, which enables full ACU regulation compliance.
▪ Safety valve rubber ensures 100% safety
▪ Pre-greased O-ring for easy installation
▪ Compatible with all oil types
▪ TÜV tested and certified
To fit all years and models of the machines listed below
Learn More -
Details
Genuine Ducati OEM steering stem headstock bearing seal for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s 93010041B
Price:£5.94Brand new genuine Ducati OEM steering head bearing seal part number 93010041B.
These are supplied singularly and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a single seal, you will need a quantity of 2 per machine that you are ordering them for if you need to replace both the top and bottom seal. They are supplied this way, as it is common to only require a replacement for the top seal when servicing or repairing your Ducati motorcycle. A handy genuine Ducati OEM service replacement spare part for your Ducati motorcycle. Learn More -
Details
MOTUL motorcycle hydraulic clutch & brake fluid DOT 3 & 4 500ml 102718
Price:£7.81MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml
Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)
Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3374650237312
Part number: 102718 Learn More -
Details
Fuel filter for Ducati 748 749 848 851 888 907 ie 916 996 998 999 1098 1198 D16RR SC 1000 MTS 620 1000 1100 ST2 ST3 ST4 Supersport Monster Mahle
Price:£26.84Brand new Mahle fuel filter.
As per all of the Ducati OEM part numbers 42540041B, 42540041A and 42540141A
This is to fit the models as below
Mahle fuel filters are made in Austria.
A handy low cost spare part to help keep your machine running tip top. Learn More -
Details
JT Sprockets 16 tooth front sprocket for Ducati 748 851 888 906 Monster 400 600 620 695 696 750 797 800 900 SS SL 520 pitch 736.16
Price:£15.02New 16 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 16 tooth 520 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
JMP front sprocket retaining plate for Ducati 748 851 888 916 996 Monster Supersport Scrambler ST2 ST4 Multistrada 620 SL MH900e
Price:£7.26Brand new front sprocket retaining washer plate made by JMP in Germany.
This will fit the following Ducati models.
Equivalent to OEM part number 826.1.011.1A or alternate number 067016105
A handy low cost spare part for your pride and joy. Learn More

