Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
Ducati rear paddock stand PIN - 40mm - 1098, 1198, 1199 1299 Panigale, Diavel, Streetfighter 1098, MTS1200
Price:£44.99This is brand new 40mm PIN to fit the Rear Paddock Stand for single sided swing arm models that we also supply
Important note: This is the pin kit only
If you already have one of these stands and change bikes, there is no need to replace the whole stand. Simply order a new pin of the correct size to suit your new bike. This saves that added expense when acquiring a new machine.
This rear stand pin fits the Ducati models with single sided swing arm as the list below.
The Ducati 1098 had two different versions of rear spindle. From May 07 onwards it used one that will use this 40mm pin for the stand. All machine before May 07 use a 42mm pin, please look at our other items for this. If you are unsure, please measure the left hand side of the rear spindle to confirm prior to ordering.
We also have pins in different sizes to fit these stands should you require one for a different machine. Learn More -
Details
Swing Arm Pivot Seal Rings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:£7.27NTN Brand new top quality pair of swing arm pivot seals for Ducati machines.
These fit on the swing arm each side of the needle roller bearings.
Equivalent Ducati part no 0412.02.295 or also 930.5.012.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
Clutch lever for Ducati 749 848 999 1098 1198 Panigale Streetfighter Monster S4RS 1100 Diavel Radial version in silver chrome finish
Price:£29.99This is a brand new clutch lever in silver chrome finish.
Genuine levers are incredibly expensive. We have a top quality replica lever here at a fraction of the cost.
This is the radial type to fit the models listed in the pull down box below.
We also have levers in our shop to suit earlier model Ducati's. Learn More -
Details
Ducati Billet Clutch Slave Cylinder Oberon Performance CLU-0116 (Special Order Part)
Price:£112.50This replacement Ducati clutch slave cylinder has been designed to improve the performance and the looks of the original Ducati cylinder.
This is a very well engineered and detailed product.
Substantially reducing the heaviness of the original clutch action, aching arms and clunky gear changes are a thing of the past. The internal piston design, seals and breather hole have been drastically enhanced to stop leaks and leave a smoother clutch action. CNC machined from billet for lightness, strength and precision looks.
Everything you need is included in the kit, plus a conversion shaft 'extension piece' for earlier bikes that use the shorter clutch push rod.
Direct fit for ALL external slave cylinder models as per the models listed below.
The clutch slave cylinder also includes mounting screws and banjo washers. So it's a ready to fit kit.
Available in a choice of six colours, in order that you may compliment your machine whilst upgrading. Learn More
Details
JMP Motorcycle Brake Caliper Piston Detaching Pliers Tool ideal for garage or workshop use 7224975 TLSHOL49
Price:
£24.29
JMP Brake Caliper Piston Detaching Pliers Tool.
This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.
This tool has a 16.5mm to 40mm capacity.
We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.
These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.
Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.
EAN number: 4043981036961
Part number: 7224975 Learn More
This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.
This tool has a 16.5mm to 40mm capacity.
We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.
These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.
Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.
EAN number: 4043981036961
Part number: 7224975 Learn More
Details
Filtrex performance air filter for Ducati 848 1098 1198 Multistrada 1200 Diavel Streetfighter Sport 1000
Price:
£57.59
New to the FILTREX range comes a performance replacement air filter product guaranteed to increase horsepower and acceleration.
Professionally engineered with a premium filtration material set within a high specification chassis, Filtrex will deliver increased performance and longevity over OEM and other aftermarket filters.
This simply replaces the OEM air filter part number 426.1.020.1A
A very good life time warranty upgrade and an instant performance upgrade.
To fit the Ducati models as the list below
Learn More
Professionally engineered with a premium filtration material set within a high specification chassis, Filtrex will deliver increased performance and longevity over OEM and other aftermarket filters.
This simply replaces the OEM air filter part number 426.1.020.1A
A very good life time warranty upgrade and an instant performance upgrade.
To fit the Ducati models as the list below
Details
NTN Swing Arm Pivot Needle Roller bearings PAIR for Ducati 748 749 848 916 996 998 999 1098 1198 1199 Diavel Multistrada D16RR
Price:
£15.28
NTN Brand new top quality pair of swing arm pivot needle roller for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 76400.0001 or part code 701.4.017.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 76400.0001 or part code 701.4.017.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Details
SBS 730 HF Street Excel Ceramic Rear brake pads
Price:
£18.71
Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Street Excel Ceramic (HF) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Part number: 730HF
Ean Number: 5703858106522
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Street Excel Ceramic (HF) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Part number: 730HF
Ean Number: 5703858106522
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More
Details
Ducati front and rear paddock stand set - 42mm version for early Ducati 1098 upto May 2007
Price:
£145.42
This is brand new Front & Rear Paddock Stand set for single sided swing arm models
This is a set of paddock stands, one front and one rear.
Paddock stands are suitable for general maintenance and repair work. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.
We also have these listed in our shop as a rear stand on it's own, should that be required instead.
This rear stand fits the Ducati models with single sided swing arm as the list below.
The Ducati 1098 had two different versions of rear spindle. This 42mm will fit Ducati 1098 made up till May 07. Later machine after May 07 use a 40mm pin, please look at our other items for this. If you are unsure, please measure the left hand side of the rear spindle to confirm prior to ordering.
Front stand is universal so could easily be used on a variety of other bikes.
Front stand has spring loaded quick release under fork adaptors.
Heavy duty nylon wheels.
These stands are NOT intended for storage use.
Tough powder coated red finish. Learn More
This is a set of paddock stands, one front and one rear.
Paddock stands are suitable for general maintenance and repair work. Side paddock stands utilise a locking adaptor pin which inserts and locks into the rear axle.
We also have these listed in our shop as a rear stand on it's own, should that be required instead.
This rear stand fits the Ducati models with single sided swing arm as the list below.
The Ducati 1098 had two different versions of rear spindle. This 42mm will fit Ducati 1098 made up till May 07. Later machine after May 07 use a 40mm pin, please look at our other items for this. If you are unsure, please measure the left hand side of the rear spindle to confirm prior to ordering.
Front stand is universal so could easily be used on a variety of other bikes.
Front stand has spring loaded quick release under fork adaptors.
Heavy duty nylon wheels.
These stands are NOT intended for storage use.
Tough powder coated red finish. Learn More