Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
SBS Sintered Front brake pads for Ducati Twin pin caliper 706HS
Price:£21.18Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
JT Sprockets 39 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.39
Price:£28.24New 39 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 39 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
ProClean GripLock non adhesive Grip Fitting Spray Aerosol 70ml
Price:£10.00Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.
Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.
ProClean demonstration video
Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.
Available as a 70ml aerosol spray.
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More -
Details
Renthal firm compound handle bar grips G149
Price:£10.79Renthal highly developed, Firm compound race grips with full diamond pattern.
Renthal's grip technology ensures that the grip exactly matches your style.
Renthal grips give you a very comfortable ride and great feel.
These are the 125mm long version, ideal for your Ducati. Open ended so that you can retain the use of your bar ends. This is for a Pair of grips.
These are a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grip glue and Renthal clean grips in our Shop, please take a look. Learn More -
Details
NTN Swing Arm Pivot Roller bearings for Ducati - PAIR
Price:£14.68NTN Brand new top quality pair of swing arm pivot roller bearings for Ducati machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
Equivalent Ducati part no 702.5.045.1A and 75162.2566
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
JT Sprockets 15 tooth front sprocket for Ducati 520 pitch conversion 749 848 998 999 1098 1198 JTF742.15
Price:£14.28New 15 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
Note: this is a 520 conversion sprocket and will only fit if all of your final drive is 520 pitch rather than the OEM 525 pitch.
This will fit the following models.
* 15 tooth 520 pitch steel front JT sprocket
* Note * This is part of a 520 conversion on the above models, as they are either 525 or 530 pitch as OEM. So you would need to convert all of the final drive on those models. We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
Eccentric rear hub Seal Rings PAIR for Ducati 748 916 996 998 Monster S2R S4R S4Rs 1100 Multistrada 1000 1100 Hypermotard 796 1100
Price:£13.27This is a pair of seals to fit either side of the needle roller bearing in the eccentric rear hub on the models listed below.
This is to fit the eccentric rear hub with Ducati part no. 819.2.039.1A or later revised part no. 819.2.039.2A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Learn More -
Details
Quick Release Billet rear sprocket carrier for Ducati 748, 848, 916, 996, 998, Hypermotard Hyperstrada 821 939, Monster 796, S2R, S4R, 1100 / Evo, Multistrada 1000, 1100
Price:£74.99Brand new light weight billet alloy sprocket carrier. Makes changing rear sprockets quick and easy.
This gives a performance advantage as it will reduce un-sprung mass at the rear hub. This helps to improve both acceleration and turn in due the lower inertia generated at the rear hub.
The pattern is correct to accept sprockets from the big name manufacturers including Renthal & JT, so there are plenty of options for sprocket choice.
A very high spec piece of kit that also implements a cush drive saver. The extra pieces of alloy around the rear of each cush drive as shown, stops fatigued cush drive bobbins from separating and causing damage to the eccentric rear hub. This is a known weak point on rear cush drives and eliminated by this sprocket adapter.
This will fit the following models.
Fitting a quick release sprocket adapter means no more reaching for a 41mm socket to remove the sprocket carrier when changing the rear sprocket.
Changing a rear sprocket with one of these fitted is done with minimal tools in a matter of minutes. Learn More -
Details
JT Sprockets 36 tooth alloy rear sprocket for Ducati 848 916 996 998 Monster 796 821 939 1100 Hypermotard 1100 Multistrada 525 pitch JTA752.36
Price:£28.24New 36 tooth 525 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 36 tooth 525 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
SBS 730 HF Street Excel Ceramic Rear brake pads
Price:£18.71Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Street Excel Ceramic (HF) compound rear brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Part number: 730HF
Ean Number: 5703858106522
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More