Ducati
Ducati Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Ducati motorcycle. Please browse the categories on the left or alternatively try out the search box on the navigation menu
-
Details
Motorcycle Drive Chain Cleaning Brush CHBBSH02
Price:£10.00
Dual headed chain brush for easy agitation of dirt when cleaning your motorcycle final drive chain
Chain maintenance is key to getting the most out of your motorcycle and also extending the life of your chain.
Suitable for use with most chain cleaning products.
The shape of the brush head allows you to clean 3 sides of the chain simultaneously, which will speed up the job at hand.
The long bristles at the other end allow the user to clean hard reach areas.
We also have replacement brush heads available for this item:
Click here for replacement brush heads
EAN number: 5034862213600
Part number: CHBBSH02 Learn More -
Details
JT Sprockets 42 tooth 520 pitch alloy rear sprocket for Ducati 748 Monster S2R 800 520 conversion for 848 916 996 998 JTA751.42
Price:£23.04New 42 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
This will also fit the following machines as a 520 conversion. Please note that all of the final drive - front sprocket, rear sprocket and chain have to be the same pitch = 520 in order to use this on the machines listed below:
* 42 tooth 520 pitch alloy rear JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Note: This rear sprocket requires the use of either the JT Sprockets or the Renthal quick release rear carrier. You will NOT be able to use this sprocket unless you already have one of these fitted.
We have the JT Sprocket carrier available in our shop, please take a look in this section and it is the first item listed. Learn More -
Details
Fuchs Renolit red rubber grease G51 - 500g - brake caliper seals
Price:£13.20Fuchs Renolit red rubber grease G51 - 500g for brake caliper seals
A special rubber compatible grease or use on hydraulic brake and clutch components where hardening or swelling of rubber must be avoided.
It is designed to assist in the assembly of rubber components for brake, clutch and suspension units and is suitable for natural and synthetic rubbers.
This product is highly resistant to petrol and other chemical attack, mechanical and thermally stable.
This product is ideal for use with the following:
• Hydraulic components
• Rubber components
• Rubber seals
• Motorcycle brake caliper assemblies
• Petrol resistant applications
• For lubricating and servicing oil resistant seals
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More -
Details
Thumbs Up grip glue for handle bar grips GRPGLU5
Price:£3.995ml tube of 'Thumbs Up' grip glue.
● Suitable for all grip types.
● Strong adhesive
● In a handy 5ml tube size, enough for a set of grips with no waste
This is a universal item but we know that they are also suitable for the following Ducati's
We also have Renthal grips and clean grips in our Shop, please take a look. Learn More -
Details
Ariete forks seals for Ducati and Aprilia Ohlins models RSV1000 RSV4 748R 749R 996R 998R 999R 1098 1198 Desmosedici D16RR MTS1100 Monster 1100S S4Rs 43mm ARI123
Price:£21.83This is a pair of Ariete forks seals to fit the Aprilia & Ducati Ohlins fork models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 43 x 55 x 11mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513536373
Part number: ARI123 Learn More -
Details
Oberon Performance Billet Clutch Basket Spanner Tool CLU-0010 Ducati 748, 749, 916, 996, 998, 999, 1098, 1198, Hypermotard, Monster, Multistrada, ST (Special Order Part)
Price:£103.49This Billet clutch basket spanner tool is designed for the Ducati models with a dry clutch. This tool is of the same high quality as all other Oberon products.
These tools are designed to be used only within the Ducati recommended torque settings, never use power or air tools on these critical components.
This is almost a piece of art rather than a tool. We use this very same tool in our own workshop. Hard anodised and guaranteed if used within the manufacturers recommendations.
This is to fit and use with the following Ducati models listed below.
Learn More -
Details
JMP steering head bearing removal tool 35mm - 50 mm headstock race remover
Price:£37.37Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm
This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.
To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.
• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.
A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More -
Details
NTN steering stem headstock bearings - pair for Ducati 748 749 848 899 916 996 998 999 1098 1198 1199 Panigale Monster 620 695 696 800 1000 S4 Multistrada ST2 ST3 ST4 ST4s
Price:£48.88NTN Brand new top quality pair of roller ball bearings to fit the steering stem headstock.
NTN Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are an exact equivalent to the OEM bearings, almost indiscernible to the original parts. These are not the inferior after market tapered needle bearings that are available, these are exactly the same as the OEM. These are as per OEM bearings part numbers 702.4.004.1A and also 702.4.123.1A
These are supplied as a pair and are to fit the Ducati models listed in the pull down box below.
Please note, these bearings are supplied as a pair set, you will need only a quantity of 1 per machine that you are ordering them for. They are also supplied complete, with 3 pieces per bearing as shown. You will receive all 6 pieces as shown to the left, as per 2 complete bearings sets for an order of 1 item. Learn More -
Details
Athena OEM style air filter pair set for Ducati 748, 916, 996 & 998 models S410110200001
Price:£9.04A pair of brand new OEM style Athena air filters.
These are a direct replacement for the OEM air filter foam that sit inside the ram air tubes.
*Note* you do need to reuse the plastic cages that hold the OEM air filters in place. These are simply removed from the OEM air filter and then clicked into place over these air filter elements.
These are one of the highest quality OEM equivalent replacements available and offer a huge saving over the OEM air filter costs. These are made in Italy by Athena
To fit the Ducati 748, 916, 996 & 998 all years and all models as the list below
A very well priced handy spare part to fit your machine and help keep it running top top.
EAN number: 8057018264353
Part number: S410110200001 Learn More -
Details
Motul 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Price:£10.31Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre
Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.
Standards: API SJ / SH / SG - JASO MA
• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters
This is 1 litre of Motul 5000 4T Semi-synthetic Engine Oil 10W-40
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More