JMP Brake Caliper Piston Detaching Pliers Tool.

This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.

This tool has a 16.5mm to 40mm capacity.

We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.

These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.

Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red.

EAN number: 4043981036961
Part number: 7224975 Learn More

Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm

This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.

To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.

• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.

A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More

Brand new top quality German Made JMP Piston Ring Installer Remover.

Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.

• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More

Brand new top quality German made JMP Tools chrome vanadium socket adapter, 1/2" female to 3/4" male.

Ideal for use with the wheel nut sockets that we also have available
Essential tool for the maintenance of your machine.

The photos in the gallery are of the actual item offered for sale, please study them all carefully prior to ordering.

We have other tools for your Ducati in our shop, please take a look. Learn More

Brand new front brake switch made by JMP in Germany.
This will fit the following Cagiva models.

Please select Cagiva Mito 125 Evo 1 94-99 Cagiva Mito 125 Evo 2 00-07 Cagiva Mito 125 SP525 08-14 Cagiva Planet 125 N1 97-02 Cagiva Raptor 125 03-14 Cagiva River 600 95-97 Cagiva Supercity 125 97-00

Equivalent to OEM part number 800047953

The photos in the listing are of an actual item offered for sale, please study them all carefully prior to ordering.
If you at all unsure, then please send us a message and we will help with fitment information.
Handy replacement spare electrical service part for your Cagiva motorcycle.

EAN number: 4043981177763
Part number: 7050607 Learn More

Here we have an Indicator to fit the Cagiva models in the pull down list below. This comes complete with bulb and wiring and is ready to fit. This can be used as front or rear fitment.
To fit the following Cagiva models


Learn More

Here we have a pair of indicators to fit the Ducati models in the pull down list below. These comes complete with bulb and wiring and is ready to fit. These can be used as front or rear fitment (model dependant).
This is a pair of opposing indicators and can be used as a front pair, rear pair, left pair of right pair depending upon which machine you have. This is due to the small hole that should face downwards when fitted to allow condensation to drain away. Each indicator is otherwise identical to the indicator at the opposite side of your Ducati motorcycle.
These can be used only on the rear fitment on some of the machines listed below and also front fitment on other models listed. Please compare the image of the indicator to your machine to be sure this is the correct indicator fitment for your machine

To fit the following Ducati models




These also fit the rear of the ST range of machines although they have different electrical connectors on the wiring.
Handy replacement spare parts for your Ducati motorcycle

EAN numbers: 4043981047127 and 4043981047110
Part numbers: 7061336 and 7060403 Learn More

Here we have a set of 4 Indicators to fit the Ducati models in the pull down list below. These come complete with bulbs and wiring and are ready to fit. These can be used as front or rear fitment.
To fit the following Ducati models




These also fit the rear of the ST range of machines although they have different electrical connectors on the wiring. Learn More

Here we have an Indicator to fit the Ducati models in the pull down list below. This comes complete with bulb and wiring and is ready to fit. This can be used as front or rear fitment.
This indicator is for front left or rear right fitment on the motorcycle and only differs from the opposing indicator due to the small hole that should face downwards when fitted to allow condensation to drain away. It is otherwise identical to the indicator at the opposite side of your Ducati motorcycle.
This can be used only on the rear fitment on some of the machines listed below and also front fitment on other models listed. Please compare the image of the indicator to your machine to be sure this is the correct indicator fitment for your machine

To fit the following Ducati models




These also fit the rear of the ST range of machines although they have different electrical connectors on the wiring.
Handy replacement spare part for your Ducati motorcycle

EAN number: 4043981047127
Part number: 7061336 Learn More