The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

Brake pads that make you stop fast!!

SBS motorcycle brake pads are the "Choice of Champions".

Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.

This is one caliper set of Racing Sinter (RS) compound front brake pads to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More

New to the Hiflo Filtro range comes a replacement air filter product that is a direct equivalent to the Aprilia OEM air filter element.
This simply replaces the OEM air filter (AP8104329) without any need for modification or adjustment.
This Hiflo Filtro air filter fits the Aprilia models listed below

Learn More

Motul radiator fluid Motocool Expert 1 litre

Motul Moto Cool Expert with hybrid technology is a ready radiator fluid for closed cooling circuits specifically for motorcycles.
Suitable for all motorcycle engines (road, terrain, quads).
Stable temperature and lowers the operating temperature.
Improves cooling even in stop-and-go traffic. No dilution with water required.

Nitrite free / Amine free / Phosphate free

Advantages:
• Ready to use cooling liquid, no dilution with water is required • Prevents calcium deposits in the cooling circuit, especially in narrow cooling circuits • A special hybrid technology allows a perfect heat exchange and improves the performance of the engine • Guaranteed optimum frost and corrosion protection of the entire cooling system • Excellent compatibility with seal and hose materials • With all coolants (organic and mineral) miscible • Is very resistant to heat and lowers the operating temperature • Improves cooling even in "stop and go traffic" • Suitable for aluminum engines • In areas with hard water only a prefabricated product as Motocool Expert should be used

Release:
ASTM D3306 / D4656; BS 6580; AFNOR NFR 15-601; SAE J 1034; JIS K2234; KSM 2142

Characteristics:
Antifreeze: -37 °C
Boiling point: 135 °C

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

Brand new top quality German made JMP Tools chrome vanadium socket adapter, 1/2" female to 3/4" male.

Ideal for use with the wheel nut sockets that we also have available
Essential tool for the maintenance of your machine.

The photos in the gallery are of the actual item offered for sale, please study them all carefully prior to ordering.

We have other tools for your Ducati in our shop, please take a look. Learn More

MOTUL hydraulic clutch & brake fluid DOT 3 & 4 500ml

Motul Brake Fluid DOT 3 & 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.

Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.

Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.

Specifications / Approvals:
Specifications: DOT 3 & DOT 4, SAE J 1703, ISO 4925
Released: FMVSS 116 DOT 4 et DOT 3; SAE J 1703; ISO 4925 (3 et 4)

Characteristics:
Dry boiling point: 245 ° C
Wet point: 160 ° C

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.

EAN number: 3374650237312
Part number: 102718 Learn More

New 43 tooth 525 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:


This will fit the following machines.


* 43 tooth 525 pitch steel rear JT sprocket.

We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Aprilia motorcycle

EAN number: 824225313185
Part number: JTR702.43 Learn More

New 45 tooth 525 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:


This will fit the following machines.


* 45 tooth 525 pitch steel rear JT sprocket.

We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Aprilia motorcycle

EAN number: 824225313192
Part number: JTR702.45 Learn More

Here we have an Indicator to fit the Aprilia models in the pull down list below. This comes complete with bulb and wiring and is ready to fit. This can be used as front right or rear left fitment.
Please note: the wiring connector may differ from OEM, but the OEM indicators are supplied without wiring and this is easily transferred from your original indicator to this replacement, should there be a difference in the connector.

To fit the following Aprilia models

Please select Aprilia RS4 50 4T 11-16 Aprilia RS4 125 4T 11-17 Aprilia RS4 125 4T Replica 17 Aprilia Tuono 125 4T 17 Aprilia RSV4 1000 FACTORY 09-10 Aprilia RSV4 1000 09-10 Aprilia Shiver 750 GT 09-16 Aprilia Shiver 750 07-16 Aprilia Tuono V4 1000 11-14 Aprilia Tuono V4 1100 Factory 15-17 Aprilia Tuono V4 RR 1100 15-17 Aprilia Caponord 1200 14-16

We also have these available for the front left or rear right. Handy replacement spare parts to keep your machine looking and working tip top. Learn More