Aprilia
Aprilia Parts, Spares & Accessories
We have a comprehensive range of parts and accessories available for your Aprilia motorcycle. Please browse the categories on the left or try out the search box on the navigation menu.
Whether you own a learner RS50, MX125 (enjoy a bit of off-road fun) or an RSV4 Superbike, each bike, every once in a while, needs a little TLC. Each make and model differs so be sure to turn to your trusty motorcycle handbook to check for service intervals.
We stock all the essentials for you to fully service your bike, from the front and rear sprockets, to lubricants, brake discs and pads. If you need any assistance when fitting your Aprilia spares and accessories, please call for assistance, we have a team that will be happy to help advise you if you get stuck.
Our Aprilia parts list is forever growing so keep checking back for new parts or ask if you cannot see a part you require listed within our online catalogue. We are based in Halifax and deliver anywhere in the UK and Worldwide.
-
Details
15 tooth JT front Sprocket for Aprilia RS RX SX 50 RS4 50 JTF1128.15 JTF1129.15
Price:£5.28New 15 tooth 420 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 15 tooth 420 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More -
Details
SBS 706DC Dual Carbon Front brake pads Twin pin caliper
Price:£29.63The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.
Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!
This is one caliper set of Dual Carbon (DC) compound front brake pads.
These are to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
Par number: 706DC
EAN number: 5703858179779
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team
BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.
When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.
When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More -
Details
JT front 520 conversion Sprocket 16 tooth Aprilia RSV1000 RSV4 Tuono V4 JTF705.16
Price:£14.98New 16 tooth 520 pitch front sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment front sprocket to fit your machine, with the dimensions and format as below:
This will fit the following models.
* 16 tooth 525 pitch steel front JT sprocket
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy low cost spare replacement part for your Aprilia motorcycle
EAN number: 824225206104
Part number: JTF705.16 Learn More -
Details
Ariete Fork Oil Seals pair set for Aprilia Cagiva Ducati 40mm XNBR ARI023 40 x 52/52.7 x 10/10.5mm
Price:£13.30Brand new pair of Ariete forks oil seals to fit the motorcycle models in the pull down list below
Each Ariete fork seal undergoes a final grinding operation and is individually tested, to guarantee it's efficiency.
Fork seal size: 40 x 52/52.7 x 10/10.5mm
Ask for the best !
Genuine Ariete for oil seals, ,made in Italy, these are made from XNBR, the perfect material for the job.
Handy low cost replacement spare service part for your Aprilia, Cagiva or Ducati motorcycle.
EAN number: 8051513535482
Part number: ARI023 Learn More -
Details
Front brake lever for Aprilia RSV1000 98-01 Tuono 1000 02-08 Falco SL - Silver - early axial
Price:£29.99This is brand new front brake lever in silver chrome finish. This is the type to fit RS250 from 98-03, RSV1000 Mille models from 98-03, RSV1000 Tuono models from 02-11 and Tuono V4R models 11-12.
This lever is to fit machines with a master cylinder using a pivot bolt size of 8mm.
Genuine levers are circa £64 each. We have a top quality replica lever here at a fraction of the cost. Learn More -
Details
NGK Standard Spark Plug BR10ES
Price:£4.80NGK Standard Spark Plug type BR10ES
The workhorse, at the heart of smooth-running engines around the world.
● OEM Quality
● Triple-Gasket Sealing Process
● Consistent Performance
● Plug of Choice in Millions of Vehicles
If you are unsure as to which spark plug you need, then please email us or try out the NGK Partfinder website Learn More -
Details
JT rear Sprocket 44 tooth 520 pitch Aprilia RS125 RSVR 1000 RSV4 Tuono V4R JTR703.44
Price:£13.34New 44 tooth 520 pitch rear sprocket by JT Sprockets
The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:
This will fit the following machines.
* 40 tooth 520 pitch steel rear JT sprocket.
We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Aprilia motorcycle
EAN number: 824225310993
Part number: JTR703.44 Learn More -
Details
SBS Sintered Front brake pads for Aprilia RSV4, RSV4R / Factory 841HS
Price:£21.18Brake pads that make you stop fast!!
SBS motorcycle brake pads are the "Choice of Champions".
Each season SBS is the preferred brand with the world's top riders when titles are distributed in the world of Supersport 600, Superbike, etc.
This is one caliper set of Sintered (HS) compound front brake pads to fit all of the machines in the pull down list below.
The dimensions and format of the pads are as below:
If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.
SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.
SBS promotional video
SBS brake pads are used and trusted throughout the Road Racing World Championships.
Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team
Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing
Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia
Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing
Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team Learn More -
Details
Aprilia RS125 NTN rear wheel bearings RS125 Tuono
Price:£12.74NTN Brand new top quality pair of rear wheel bearings for Aprilia machines.
NTN / SNR Bearings are certificated O.E. suppliers to the four major Japanese motorcycle manufacturers, in addition to Ducati & MV Agusta.
These are supplied as a pair and are to fit the Aprilia models listed in the pull down box below.
Details
Billet alloy paddock stand bobbin spools M6 in red PDSBOB6R
Price:£14.99Brand new Billet alloy swing arm spool bobbins in anodized red finish.
To fit motorcycles with M6 x 1.0mm swing arm threads.
● These help to protect swing arm in crash
● Allow bike to be lifted by paddock stand
Repair or replacement of a damaged swing-arm is costly, Swing Arm Spools can minimize damage by providing an alternative point of ground contact when the bike is dropped or crashed.
Manufactured from high grade T6 Aluminium. Each kit is CAD designed and CNC machined.
Swing Arm Spools offer protection with functionality, enabling lifting of the rear of the bike using a paddock stand fitted with a suitable spool fork fitting.
We have a wide selection of colours and sizes available for these, please browse around shop. Learn More