Brand new top quality spring puller tool from the BikeTek range of tool products.

Suitable for easy removal and installation of a variety of springs all over your motorcycle.

• Universal tool for both spring removal and refitting
• Applications include: exhaust springs, brake springs, side stand springs, centre stand springs, general return spring fitting tool
• Length 155mm, black powder coated finish
• Manufactured by BikeTek.
• Time saver.
• Essential tool. Learn More

Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 4 Litre

Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.

Standards: API SJ / SH / SG - JASO MA

• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters

This is 4 litres of Motul 5000 4T Semi-synthetic Engine Oil 10W-40

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

Brand new top quality German Made JMP Piston Ring Installer Remover.

Suitable for easy removal and installation of piston rings your motorcycle.
This is a premium version of a tool of this type that also incorporates an adjustable span screw. The stops the jaws from being able to open too far, as adjusted and as such, prevents possible damage to piston rings resultant from opening them too far.

• For piston rings size range 1.2-6.3mm(3/64"-1/4") in thickness
• Universal tool for both removal and refitting
• Vinyl grip spring loaded handles.
• Adjustable span stop screw helps to prevent ring breakage.
• Manufactured from Selected steel.
• Manufactured by JMP, Germany.
• Time saver.
• Essential tool. Learn More

Motul - 5000 4T Semi-synthetic Engine Oil 10W-40 - 1 Litre

Meets JASO MA. Ideal for oil immersed clutches. Compatible with catalytic converters.

Standards: API SJ / SH / SG - JASO MA

• HC-Tech oil
• Meets JASO MA
• Ideal for oil immersed wet clutches
• Compatible with catalytic converters

This is 1 litre of Motul 5000 4T Semi-synthetic Engine Oil 10W-40

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail. Learn More

Brand new top quality German Made JMP steering head bearing removal tool 35mm - 50 mm

This tool is used for the job of removing steering stem head race bearings from the frame of motorcycles. This special drift allows the bearing outer racer to be easily tapped out, ensuring a swift removal.

To use, the tool is simply pulled upwards through the bearing to be removed. Once through the bearing, the sprung loaded tongues of the tool move outwards to the inside of the neck of the frame. Lowering the tool against the bearing ensures that the tool will now be located against the top of the outer edge of the bearing. Tapping the top of the tool will allow the bearing to be easily and squarely removed, as the bearing is pushed out with the four equally spaced tongues on the tool.

• Drift for easily removing bearings from the frame
• Easy to use for most steering head race bearings
• Ideal for motorcycles with steering head bearings between 35mm - 50mm outer race diameter
• Length approx 305mm
• Time saver.
• Essential tool.

A very handy tool to add to any mechanics tool box, albeit home mechanic or professional mechanic alike. Learn More

This is brand new universal front Paddock Stand from BikeTek


The series 3 paddock stands utilise a unique design to create a sturdier and stronger stand, the revised handle shape offers better handling for lifting motorcyles.

The BikeTek Front Paddock Stand allows easy and safe lifting of front wheels for most repair and maintenance jobs. Extra heavy duty construction, this stand is available in red finish and supplied with front under-fork adaptors.

Features:

* Spring loaded quick release under fork adaptors
* Heavy Duty oil resistant wheels
* Protective rubber base bungs
* Tough powder coated red finish

Front paddock stands MUST be used in conjunction with a rear paddock stand. Learn More

New 47 tooth 520 pitch rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:


This will fit the following machines.


* 47 tooth 520 pitch steel rear JT sprocket.

We have other sprocket tooth variations for these machines in the shop, please take a look.
Handy replacement spare service part for your Aprilia motorcycle

EAN number: 824225311358
Part number: JTR703.47 Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Par number: 706DC
EAN number: 5703858179779

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

Renthal highly developed grip glue, specially formulated to give a secure bond without damaging the grip.

This is a universal item and is suitable for all motorcycles.

We also have Progrip grips, Renthal grips and clean grips in our Shop, please take a look. Learn More