Details
TRW Lucas hydraulic clutch & brake fluid DOT 4 500ml PFB450
TRW Lucas Brake Fluid DOT 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Corresponds to: FMVSS § 571.116 DOT4 / DOT3, SAEJ 1703 and ISO 4925
Characteristics:
Dry boiling point: 269 ° C
Wet point: 170 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3322937895410
Part number: PFB450
TRW Lucas Brake Fluid DOT 4 is a synthetic brake fluid based on polyglycol for disc and drum brake systems.
Advantages:
• Can be mixed with all DOT 3, DOT 4 and DOT 5.1 products
• Due to the high wet boiling point, especially long-lasting brake fluid
• High temperature resistance and stability due to the high dry boiling point
• High safety standard
• Enables efficient operation of the braking system under extreme conditions
• Corrosion resistant; behaves neutrally against seals in the brake system
• Interval intervals: Between 12 and 24 months (depending on manufacturer's recommendation)
• Carefully seal and store in the original container to prevent moisture from absorbing
• For safety reasons, brake fluids should not be refilled but replaced.
• For use on hydraulic brake and clutch systems on your motorcycle.
Warning:
Can not be mixed with silicone-based brake fluids (DOT 5) as well as special fluids based on mineral (eg LHM). Liquid can attack vehicle paint.
Specifications / Approvals:
Corresponds to: FMVSS § 571.116 DOT4 / DOT3, SAEJ 1703 and ISO 4925
Characteristics:
Dry boiling point: 269 ° C
Wet point: 170 ° C
Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping liquid/oil items by Airmail.
EAN number: 3322937895410
Part number: PFB450
Additional Information
Manufacturer | TRW |
---|
- Be the first to review this product