Electrical parts

● This is a single 20mm round self adhesive stick on red reflector.
● These are ideal if you have fitted a tail tidy and just need a reflector on the rear of your machine for the MOT.
● Self adhesive, so can be fitted in a variety of locations all over the machine, including one on the rear for MOT requirements.
● Must have for those with chopped or tidied rear ends on their bikes. Learn More

Lithium Ion Battery (LTM-Line) from JMT

The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.

Indicator
All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
Just press the test button to see the charge status of the battery.

By replacing a standard lead-acid battery with a JMT lithium-ion battery, you can save up to 5 kg of weight without significant effort.
The following advantages speak in favor of JMT lithium-ion batteries:

• About 1/3 of the weight of the comparable lead-acid battery
• Brass terminals for best conductivity
• waterproof
• completely black battery case
• Battery housing made of nylon, therefore a deformation in heat is practically impossible
• Unbeatable cost / weight savings ratio
• Can be installed in any position, as there is no acid
• contains no heavy metals
• balanced discharge / charge of all cells by balancers
• fast charging with high charging current possible (up to 90% in 6 min)
• very low self-discharge (max 5% per month)
• even at high temperatures still good performance up to 60 ° C
• safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries use almost 100% of their capacity.
For this reason, the lithium versions of the JMT batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, so the battery can be replaced in a few minutes without any further adjustments.
Please note that only Lithium Ion specific chargers may be used for charging.
For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin the actual charge.
The maximum charging voltage of 14.9 volts must never be exceeded.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

Technology
JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode in normal operation.
The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

• 12 V maintenance-free lithium-ion battery
• Charging current recommended 1.5 A
• maximum charge current for fast charge 15 A

Replaces the following battery models:

YT7B-BS, YTX9-BS, YT9B-BS, YB9A-A, YB9-B, 12N9-4B-1, YTX7A-BS & YTR9-BS

JMT JMT7B-BS Motorcycle Battery is compatible with the following Aprilia, Cagiva and Ducati motorcycle models:

Please select Aprilia AF1 125 Futura 90-91 Aprilia AF1 125 Sintesi 88 Aprilia AF1 125 Sintesi Replica 89 Aprilia AF1 125 Sport Pro 92-93 Aprilia Classic 125 97-01 Aprilia ETX 125 98-01 Aprilia Europa 125 90-91 Aprilia Red Rose 125 93-96 Aprilia RS 125 Extrema / Replica 92-13 Aprilia RS 125 Extrema / Replica 80 Km/h 97-13 Aprilia RS 125 Tuono 03-04 Aprilia Scarabeo 50 4T 02-09 Aprilia Scarabeo 50 4T 4V 10-14 Aprilia Scarabeo 50 4T 4V Net 09-10 Aprilia Scarabeo 100 4T 01-04 Aprilia Sportcity 50 4T One 09-13 Aprilia Sportcity 50 2T One 10-13 Aprilia Sportcity 125 One 09-13 Aprilia SR 50 R LC 05-18 Aprilia SR 50 R LC Ditech Factory 05-14 Aprilia SR 50 LC Ditech Racing 04-05 Aprilia SR 50 LC Ditech Replica 04-05 Aprilia SR 50 LC Ditech Sport 04-05 Aprilia SR 50 AC Motard 12-13 Aprilia SR 125 Motard 12-16 Aprilia Tuareg 125 Rally 87-88 Aprilia Tuareg 125 Wind 88-90 Cagiva C10 125 Freccia 88 Cagiva C12R 125 Freccia 89-90 Cagiva C9 125 Freccia 87 Cagiva Mito 125 MK1 89-91 Cagiva Mito 125 MK2 92-93 Cagiva Mito 125 Evo 1 94-99 Cagiva Mito 125 Evo 2 99-07 Cagiva Mito 125 SP525 08-14 Cagiva N1 125 Planet 97-02 Cagiva Raptor 125 03-14 Cagiva Roadster 125 97-00 Cagiva Roadster 200 95 Cagiva Supercity 125 92-00 Ducati Panigale 899 ABS 14-15 Ducati Panigale 959 ABS 16-18 Ducati Panigale 959 Corsa ABS 18 Ducati Panigale 1100 V4 ABS 18-19 Ducati Panigale 1100 V4 S ABS 18-19 Ducati Panigale 1100 V4 Speciale ABS 18 Ducati Panigale 1199 12-14 Ducati Panigale 1199 S 12-14 Ducati Panigale 1199 R ABS 13-17 Ducati Panigale 1199 Superleggera ABS 14 Ducati Panigale 1199 S Tricolore ABS 12-13 Ducati Panigale 1299 ABS 15-17 Ducati Panigale 1299 S ABS 15-17 Ducati Panigale 1299 R FE Final Edition ABS 18-19 Ducati Panigale 1299 Superleggera ABS 17

Battery technical information

Battery type code : LTM9
Voltage : 12v
Capacity : 3 Ah (10 Std)
Capacity : 36 Wh
Type : Maintenance free Lithium
CCA : 180 A
Length : 134 mm
Width : 65 mm
Height : 93 mm
Weight : 0.8 kg
Positive terminal : Front left
Negative terminal : Front right
Manufacturer : JMT

Note: Due to the nature of the product, we are not able to ship motorcycle batteries to addresses that are not on the UK mainland.

EAN number: 4043981204483
Part number: 7070114 Learn More