Shopping cart - £0.00

You have no items in your shopping cart.

Tools

Tools

Ducati Monster S2R 800 Tools

We have an extensive range of tools available to help service and repair your Ducati Monster S2R 800.
Set Descending Direction
per page

Grid  List 

Items 1 to 10 of 41 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Workshop Heavy Duty Chain Breaker & Assembly ToolDetails

    Workshop Heavy Duty Chain Breaker & Assembly Tool

    Price:

    Regular Price: £115.20

    Special Price: £96.00




    Workshop Heavy Duty Chain Breaker & Assembly Tool.

    For all chains including:
    • 520 chains
    • 525 chains
    • 530 chains
    • 532 chains

    Heavy duty chain tool for breaking, pressing and riveting motorcycle drive chains.

    Tool can be secured using vice or spanner.

    Hexagon head shaft for socket head or spanner use.

    Replacement pins for this tool are available at the links below:

    Click here for 3mm pin
    Click here for 4mm pin
    Click here for 5mm pin
    Learn More
  2. Tirox 360º Motorcyle Drive Chain Cleaning BrushDetails

    Tirox 360º Motorcyle Drive Chain Cleaning Brush

    Price:

    Regular Price: £11.99

    Special Price: £11.39

    Tirox 360º Motorcycle Chain Cleaning Brush.

    Chain maintenance is key to getting the most out of your motorcycle and also extending the life of your chain. It's now more simple than ever before – just three easy steps:
    1) Spray 2) Scrub 3) Rinse

    How to use the Tirox 360º chain cleaning brush:
    Ensure the engine is always off.
    Cleaning is easier if you use a centre stand or paddock stand.
    Place newspaper or a drip pan under the work area of the chain and rear sprocket.
    While slowly turning your rear wheel with one hand, spray Tirox Chain Cleaner with the other hand, ensuring you completely saturate all areas of the chain and sprockets. Place newspaper behind the chain to prevent overspray onto your tire and rim.
    Allow it to soak for two minutes.
    Screw/thread on the Tirox 360º® Chain Brush. Start on a 45º angle and force the tip of the brush over the chain until one complete coil catches. Exert some pressure and guide the tip of the coil with your fingers and turn the coil until the whole brush is on the chain.
    Now stretch the brush slightly by pulling apart the two ends. This will tighten the brush onto the chains and ensure the bristles clean the tightest and most important areas of the chain - between the plates and around the O-rings.
    Now hold the brush with one hand while turning the wheel with the other. Allow the chain to pass through the brush several revolutions. Spray again for dirtier chains. Some chains may require a second cleaning.
    Uncoil the brush, reversing the method.
    This is a good time to clean your sprocket teeth and sides.

    Rinsing methods:
    We strongly recommend a jet of water, followed by wiping clean with a cloth or paper towels, then air drying. It is very important to wipe off all dirt and to rinse well. This will ensure your chain lube will do its job. Spray the brush and rinse, then spray again before storing it back in the cap.

    Suitable for use with most chain cleaning products.

    *Note* remember to lubricate your freshly cleaned chain to prolong it's life and keep it looking good. Learn More
  3. 127m Roll of 0.8mm Safety Lock WireDetails

    127m Roll of 0.8mm Safety Lock Wire

    Price:
    £14.95
    127m roll of 0.8mm Lock Wire.

    Ideal for adding lockwire features to your bike for the race look.

    It is required for ACU racing regulations to lockwire certain components.

    We also have the lock wire tool and a 127m reel of 0.8mm lock wire available. Learn More
  4. Chain puller, assembly aid toolDetails

    Chain puller, assembly aid tool

    Price:

    Regular Price: £16.33

    Special Price: £15.51





    Chain puller - assists in bringing chain ends together for linking.

    This tool can be used for a variety of chain sizes.

    It is an ideal tool for the home mechanic to help pull the chain together to allow fitting of the joining link. Learn More
  5. JMP Brake Caliper Piston Detaching Pliers Tool ideal for garage or workshop useDetails

    JMP Brake Caliper Piston Detaching Pliers Tool ideal for garage or workshop use

    Price:
    £21.95
    JMP Brake Caliper Piston Detaching Pliers Tool.

    This handy tool allows easy removal of the pistons from inside the brake calipers whilst overhauling them. They grip the inside of the piston, so that the important surface finish on the outside of the piston remains intact.

    This tool has a 16.5mm to 40mm capacity.

    We use the same tool in our own motorcycle workshop to service and repair motorcycle brakes.

    These are ideal if for maintenance in your own garage or also can be equally used in a workshop environment.

    Note: Handle colours may vary. They are sometimes in black as pictured and also sometimes in red. Learn More
  6. Brake Bleeding Assister Kit With 1 Way Non Return Bleeder Valve BRKKIT01Details

    Brake Bleeding Assister Kit With 1 Way Non Return Bleeder Valve BRKKIT01

    Price:
    £7.85
    Brake bleeding assistor kit utilises a compact unit with 1-way non return valve and connector hoses that simply attach onto the bleed nipple.

    When the nipple is open and brakes bled, the unit prevents air and old fluid from being pulled back into the system, freeing the user from having to repeatedly open and close the bleed nipple.

    A very handy tool for bleeding the brakes on your own.
    Can be used for bleeding all hydraulic brake and clutch systems on your motorcycle to easily service and repair your motorcycle.
    The item comes with complete instructions on using it for bleeding your brakes. Learn More
  7. 30m of 0.7mm Safety Lock Wire, ideal for ACU Racing or trackday requirementsDetails

    30m of 0.7mm Safety Lock Wire, ideal for ACU Racing or trackday requirements

    Price:
    £5.95
    30m of 0.7mm Lock Wire.

    Ideal for adding lockwire features to your bike for the race look.

    It is required for ACU racing regulations to lockwire certain components.

    We also have the lock wire tool and a 127m reel of 0.8mm lock wire and also lock wire tools available. Learn More
  8. Adjustable Universal Fork oil seal driver tool 39mm-50mmDetails

    Adjustable Universal Fork oil seal driver tool 39mm-50mm TLSFRK11

    Price:
    £70.00
    BikeTek Adjustable Universal Fork oil seal driver tool.

    Universal tool to safely and simply install fork oil seals into forks, without causing damage to the new oil seals or fork stanchions.

    The tool has a decent weight, so can be used akin to a slide hammer to easily sit the fork seals in place during installation.

    ● Adjustable from 39 – 50mm Learn More
  9. Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSPL12Details

    Manual twist safety lock wire twister tool & 30m of 0.8mm of lock wire TLSWPL12

    Price:
    £15.90
    Brand new manual twist safety lock wire tool.

    Ideal for adding lockwire features to your bike for the race look. Also required for ACU racing regulations to lockwire certain components.

    This comes complete with 30m of 0.8mm lock wire, so is a ready to go kit.

    A must have for race or track day use. Learn More
  10. Laser Tools top yoke steering ring nut tool Ducati 748 749 848 899 916 959 996 998 999 1098 1198 1199 1299 V4 Panigale Monster Multistrada Hypermotard Supersport Streetfighter DiavelDetails

    Laser Tools top yoke steering ring nut tool Ducati 748 749 848 899 916 959 996 998 999 1098 1198 1199 1299 V4 Panigale Monster Multistrada Hypermotard Supersport Streetfighter Diavel

    Price:
    £12.67
    Brand new top quality UK Made Laser Tools top yoke steering ring nut tool for Ducati models.

    • This specially designed tool that is purposely made for loosening and correctly torquing the top yoke ring nut with a 3/8" socket wrench.
    • Strong tool, yet light enough to carry under your seat
    • Made from 6061 aluminium with steel pins, so is both light and strong
    • Rubber cover fitted to the tool that prevents damage to the steering stem nut
    • Made in Sheffield, UK

    This is a direct equivalent to the Ducati tool part no. 88713.1058

    The tool allows the adjustment, loosening and correct torquing up of the top yoke nut on all of the Ducati models as per the list below.

    Learn More
Set Descending Direction
per page

Grid  List 

Items 1 to 10 of 41 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Ducati Mondo Cookie Policy for EU Customers

We use cookies to ensure that we give you the best user experience on our website, a streamlined checkout, and secure environment. Read About Our Cookies Allow Cookies Refuse Cookies Close