Renthal highly developed, Medium compound race grips with full diamond pattern. Renthal's grip technology ensures that the grip exactly matches your style.

Renthal grips give you a very comfortable ride and great feel.

These are the 125mm long version, ideal for your sportsbike or superbike. Open ended so that you can retain the use of your bar ends.

This is for a Pair of grips.

We also have Renthal grip glue and Renthal clean grips in our Shop, please take a look. Learn More

New 42 tooth 520 pitch steel rear sprocket by JT Sprockets

The photo above is a generic picture for representation purposes, you will receive the correct fitment rear sprocket to fit your machine, with the dimensions and format as below:


This will fit the following machines.


* 42 tooth 520 pitch steel rear JT sprocket.

We have other sprocket tooth variations for these machines in the shop, please take a look. Learn More

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.

World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:
• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite.
• High friction level and progressive brake feel.
• High thermal stability.
• Consistent brake performance and brake lever position.
• Low pad wear.
• Rotor friendly due to transfer film generated on disc surface.
• Available for the majority of new Superstock, Supersport and racing brake calipers.
• Recommended for top level international and national championship road racing.
• These are for race use only!

This is one caliper set of Dual Carbon (DC) compound front brake pads.

These are to fit all of the machines in the pull down list below.


The dimensions and format of the pads are as below:


If you have a twin caliper machine then you will need to order a quantity of 2, as you will need one set per caliper.

SBS' sublime braking properties are the result of systematic, sustained product development that focuses on creating the optimum combination of performance, durability, and safety. Knowledge, experience, and enthusiasm are the motive force in our R&D department where staff constantly set new standards and can always fulfil the demands of the best riders.Tests and more tests are a central aspect of our R&D. We perform tests on the basis of various methods in order to ensure the best results before products are launched.

Par number: 706DC
EAN number: 5703858179779

SBS promotional video



SBS brake pads are used and trusted throughout the Road Racing World Championships.

Superbike World Championship
Ten Kate Honda Racing
Althea Ducati Racing
Supersonic Racing Team

Supersport World Championship
Ten Kate Honda Racing
Kawasaki Racing
Harms Benjan Racing

Superstock European Championship 1000
Ten Kate Honda Racing
Garnier Junior Racing BMW
Team All Service System by QPD
Team MRS Yamaha France
Yamaha Italia

Superstock European Championship 600
Ten Kate Honda Racing
BWG Racing
Team MRS Yamaha France
Team Trasimeno Yamaha Italia
Team All Service System by QPD
Team MTM Racing

Endurance World Championship
Team Bolliger Kawasaki
Team RAC41
Team Phase One Endurance
Qatar Endurance Racing Team

BEDDING-IN PROCEDURE FOR SBS-DC
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
4. Then a period to allow discs to cool again before proper use.
5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed
Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed
When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session. Learn More

This is brand new front brake lever in silver chrome finish. This is the type to fit RS250 from 98-03, RSV1000 Mille models from 98-03, RSV1000 Tuono models from 02-11 and Tuono V4R models 11-12.
This lever is to fit machines with a master cylinder using a pivot bolt size of 8mm.



Genuine levers are circa £64 each. We have a top quality replica lever here at a fraction of the cost. Learn More

Pipercross performance air filter cleaning kit.

The kit comprises of 75ml aerosol of dirt retention additive and 75ml aerosol of cleaning fluid. The kit provides everything you need to clean and refresh your Pipercross air filter.

Pipercross filters offer life time warranty and a performance upgrade.

We are a dealer for all Pipercross Performance Air Filters. We have many filter kits listed in our shop, please take a look. If you need a kit that isn't listed, please ask us and we can add it to the shop for you.

Note: Due to the nature of this kit, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More

Grip Lock is a trick new product from the Pro-Clean lab. It's unique non adhesive formula is specifically designed to take the effort out of fitting new grips to motorcycles, quads and mountain bikes.

Using Grip Lock couldn't be easier. Simply hold the can approximately 50mm from the neck of the grip and apply one short burst, slide the grip onto bars and adjust into position.The grip is locked in just a few minutes making the task of changing grips not only clean, but easy.

ProClean demonstration video



Grip Lock leaves no sticky residue on the bar and when the grip is eventually replaced, a new one can be fitted in seconds.

Available as a 70ml aerosol spray.

Note: Due to the nature of this item, we are only able to ship this item to UK addresses, as we are prohibited from shipping aerosol items by Airmail. Learn More

Progrip are making probably the highest quality motorcycle grips available on the market today.

These are the very same grips as used by Carlos Checa on the Althea Ducati WSB, Colin Edwards on the Forwards Racing MotoGP bike, Alex De Angelis and also Yuki Takahashi on the Forwards Racing Moto2 bikes and many more leading race teams.

These 'gel touch' grips provide comfortable yet high levels of grip which are essential on any Superbike.

Dual compound:
● Length: 122 mm
● RVGS (Reduced Vibration Gel System) grips
● Dual density - Firm on the inside for firm grip against bar and gel on the outside for comfort whilst riding.
● The ultimate in performance and comfort.
● Open ends with wire tie / safety wire grooves.
● Color: Black and Orange
● Sold in pairs
● Made in Italy

These give your machine the factory Superbike look.

Can be used for many motorcycles with standard 22mm dia handlebars.

Open ended so that you can retain the use of your bar ends.

This is for a Pair of grips.

Part number - 717Or Learn More

A brand new Pipercross performance air filter for RS250 models from 94-03.
This replaces the OEM air filter foam that sit inside the air box, directly equivalent to Aprilia part number AP8102351.
This air filter comes pre-oiled and is ready to fit.
A very good life time warranty upgrade at not much more than an OEM filter cost.
Handy replacement performance service part for your Aprilia motorcycle. Learn More

Progrip are making probably the highest quality motorcycle grips available on the market today.

These are the very same grips as used by the factory Ducati Corse team and many more leading race teams.

These 'gel touch' grips provide comfortable yet high levels of grip which are essential on any Superbike.

Dual compound:
● The inner compound grips the handle bar firmly to ensure they do not move.
● The soft compound 'gel touch' outer gives a nice feel whilst riding.

These give your machine the factory Superbike look.

Can be used for many motorcycles with standard 22mm dia handlebars.

Open ended so that you can retain the use of your bar ends.

This is for a Pair of grips. Learn More